/challenges-projects/design-challenges/pi-iot/b/blog/posts/pi-control-hub-spoke-2-blinds-automation---setting-up-enocean-sensor-and-blinking-ledsThis blog post is a prerequisite for the Blinds Automation spoke. As part of this spoke we will automate the opening and closing of the blinds using the EnOcean Push button switch module connected to the Raspberry Pi B+.In this blog post we will attaen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/pi-iot/b/blog/posts/pi-control-hub-spoke-2-blinds-automation---setting-up-enocean-sensor-and-blinking-ledsThu, 04 Aug 2016 19:55:41 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2c325321-fd41-4980-9df6-068c53df8529DAB0<p>Nice update.</p><p>&nbsp;</p><p>Well done.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=1782&AppID=138&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/pi-iot/b/blog/posts/pi-control-hub-spoke-2-blinds-automation---setting-up-enocean-sensor-and-blinking-ledsThu, 04 Aug 2016 06:39:44 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2c325321-fd41-4980-9df6-068c53df8529balearicdynamics1<p>Hi Carmelito, Did you used a PI2, is true ? </p><p><br />As far as I know there are some issues in the several parts, are you dure that the described installation worked fine without issues? What version of Fhem did you used, the last 5.7 or the 5.5 version linked on the E14 EnOcean documentation ?</p><p>&nbsp;</p><p>Enrico</p><img src="https://community.element14.com/aggbug?PostID=1782&AppID=138&AppType=Weblog&ContentType=0" width="1" height="1">