/challenges-projects/design-challenges/pi-iot/b/blog/posts/pi-control-hub-the-hubIt is now time!! to put the all the electronic components together into a nice enclosure, which I am calling the HUB ,using some 3D printing with Wood filament and some basic wood working using a Dremel tool.Here is a gallery of the finished HUB&amp;nbs.en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/pi-iot/b/blog/posts/pi-control-hub-the-hubThu, 08 Sep 2016 14:19:48 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2276ccc3-e2aa-40d3-8681-18c9fbf88791volly0<p><span>[mention:402afa4b8ca44ee4a1f13978bc0de659:e9ed411860ed4f2ba0265705b8793d05]</span>. Cool</p><img src="https://community.element14.com/aggbug?PostID=1916&AppID=138&AppType=Weblog&ContentType=0" width="1" height="1">