Hologram Pi-ramid - 3D printed parts and initial assembly

RE: Hologram Pi-ramid - 3D printed parts and initial assembly

kiri-ll — Wed, 17 Apr 2019 14:41:05 GMT

Nice! [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-fb6aeb85-ee67-4c36-92f1-d409d1abf72c/contentimage_5F00_1.png:16:16] Just thought, that 3D printers cannot do the glass part so far. This would be just so great, to print in just whatever material you want

RE: Hologram Pi-ramid - 3D printed parts and initial assembly

dubbie — Wed, 17 Apr 2019 13:25:50 GMT

Luis,

That is some impressive 3D printing. I may have to think about changing mine as I don't think it could do that.

I'm also impressed that you are using only 15% infill. I use 85% usually and it still isn't all that good and often cracks or snaps when parts are being 'eased' together. The last time I used 100% but that didn't seem to come out correct as it was very rough.

Dubbie

RE: Hologram Pi-ramid - 3D printed parts and initial assembly

balearicdynamics — Tue, 16 Apr 2019 13:20:41 GMT

I like your interesting approach to make the threads in the holes. What material did you use PLA? And what was the shell thickness?

A very nice designed building.

Enrico

RE: Hologram Pi-ramid - 3D printed parts and initial assembly

shabaz — Tue, 16 Apr 2019 13:15:03 GMT

Hi Luis,

Wow - that looks like a very accurately designed 3D model. Looking forward to seeing it come together.

The 3D-printed tap holder is nice too : )

RE: Hologram Pi-ramid - 3D printed parts and initial assembly

genebren — Mon, 08 Apr 2019 03:21:36 GMT

Solid looking work there. I see that you are using 15% infill, do you have any issues when it comes to tapping the threads?

Good luck on your future developments on this design challenge.

Gene