/challenges-projects/design-challenges/picasso/b/blog/posts/june-10thTrimmed and installed the last piece of the casement that acts as the window surround. Added a little filler compound to make the joints seamless. Tomorrow night sand those down, and paint is on the way. I have run into a snag though. One of th...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/picasso/b/blog/posts/june-10thTue, 11 Jun 2019 06:41:49 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f95ea80e-f2bd-4d56-99ff-35a83d63837eralphjy0<p>I am currently using omxplayer to display an rtsp stream on an RPi HDMI display.&nbsp; I&#39;m traveling currently so I can&#39;t share my setup but here is a link to something similar to what I use.&nbsp; The trick is to find the correct rtsp URL for your camera webserver.&nbsp; Sounds like you have the API documentation for your camera.&nbsp; I&#39;ve found that if the stream is interrupted that the player will quit, so I check periodically for the process and restart it if necessary.&nbsp; Used to happen when power glitched.&nbsp; Doesn&#39;t happen much now that I&#39;ve added a UPS to the camera.&nbsp; I am using an FDT camera, have not used an ESCAM.</p><p>&nbsp;</p><p><a class="jive-link-external-small" href="https://www.bitpi.co/2015/03/18/raspberry-pi-surveillance-monitor/" rel="nofollow ugc noopener" target="_blank" title="https://www.bitpi.co/2015/03/18/raspberry-pi-surveillance-monitor/">https://www.bitpi.co/2015/03/18/raspberry-pi-surveillance-monitor/</a></p><p>&nbsp;</p><p>&nbsp;</p><p>Ralph</p><img src="https://community.element14.com/aggbug?PostID=7265&AppID=224&AppType=Weblog&ContentType=0" width="1" height="1">