/challenges-projects/design-challenges/pichef/b/blog/posts/stove-assistant---bernhard---pi-chef-8---hmiToday I made a little HMI for my stove assistant. For me getting the electronics working is always more exciting than getting all the things together to have a reasonable product. The HMI is one part of this.Technical background I decided t...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/pichef/b/blog/posts/stove-assistant---bernhard---pi-chef-8---hmiSat, 31 Mar 2018 20:11:48 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5a824ca9-a530-4d60-b907-7ecbb180de52genebren0<p>Nice update on your project. It is interesting to note that your temperature readings stabilized at ~66 degrees.&nbsp; I would imagine, that if the water was boiling (~100 degrees), then you might be able to calibrate your reading given this information. </p><p>Gene</p><img src="https://community.element14.com/aggbug?PostID=4568&AppID=183&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/pichef/b/blog/posts/stove-assistant---bernhard---pi-chef-8---hmiSat, 31 Mar 2018 10:45:19 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5a824ca9-a530-4d60-b907-7ecbb180de52three-phase0<p>Nice to see the progress being made. Good luck with the improvements you want to make.</p><p>&nbsp;</p><p>Kind regards</p><img src="https://community.element14.com/aggbug?PostID=4568&AppID=183&AppType=Weblog&ContentType=0" width="1" height="1">