/challenges-projects/design-challenges/sci-fi-your-pi/b/blog/posts/project-raed-update-2Hello all! Been busy getting everything connected and initialized for the build. Successfully connected Gertbot, MEMS board, and Pi Camera. I&#39;ve got them successfully communicating through a Pi Rack onto the B+ (as the MEMS refuses to work with the Pen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/sci-fi-your-pi/b/blog/posts/project-raed-update-2Fri, 15 May 2015 18:15:41 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:78cdb595-ffdd-4820-b4e6-2276b91ec20admrobotix0<p>Yeah, MEMS board does not work with Pi2, the sensor drive that is currently available does not with with the broadcom chip on RPi2. Bummer, really.</p><img src="https://community.element14.com/aggbug?PostID=20780&AppID=119&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/sci-fi-your-pi/b/blog/posts/project-raed-update-2Sun, 10 May 2015 20:03:13 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:78cdb595-ffdd-4820-b4e6-2276b91ec20aDAB0<p>It is always good to think about how you are going to test your creation before you get overwhelmed with all of the integration.</p><p>&nbsp;</p><p>I have found test planning in general to be under-assessed in most of the projects I worked on over the years.</p><p>&nbsp;</p><p>At times, the testing issues were more complex than the solutions were.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=20780&AppID=119&AppType=Weblog&ContentType=0" width="1" height="1">