/challenges-projects/design-challenges/sci-fi-your-pi/b/blog/posts/i-ching-hexagrams-week-6-7-part-1IntroductionThis is the first part of a blog covering Weeks 6 &amp; 7, as i did not have time to publish last week owing to having to complete a report for work. Not much to report, except that i have managed to take on board some of Enrico&#39;s (...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/sci-fi-your-pi/b/blog/posts/i-ching-hexagrams-week-6-7-part-1Sun, 12 Jul 2015 19:15:18 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6c393d91-a25d-482c-8434-93fa680ab0f4balearicdynamics1<p>Hello Trevor,</p><p>&nbsp;</p><p>thank you for the appreciation of my advices <span>[View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-6c393d91-a25d-482c-8434-93fa680ab0f4/contentimage_5F00_1.png:16:16]</span> I have downloaded the source from the GitHub and tried to install on two different PI, one with the emulator installed too and one with the physical PiFaceCAD. I have done the standard installation of the software to make running tests so I suppose that all the PiFaceCAD python components and core libraries are ok (suppose but I am not sure as I have not investigated in depth). On this PI I have also tested the demos of the display that come with the packages installation.</p><p>Then after I have installed your program I get an error on the lirc library (that is the part controlling the IR remote controller. Maybe that you have installed some custom parameter that is not mentioned ?</p><p>As far as what I supposed the program should run &quot;as-is&quot; immediately on any standard PiFaceCAD installation.</p><p>&nbsp;</p><p>Hope this will be helpful.</p><p>&nbsp;</p><p>Enrico</p><img src="https://community.element14.com/aggbug?PostID=44&AppID=119&AppType=Weblog&ContentType=0" width="1" height="1">