Blog

Sci-Pi Design Challenge - Winners Announcement

2023-07-28T13:43:59Z

I am excited to announce the winners of the Sci-Pi Design Challenge Challengers Used the Raspberry Pi 4 Model B or any other Raspberry Pi family products to take on the challenge of helping scientists solve common problems that they might e...(read more)

Raspberry Pi Electronic Lab #4 - Assembly

2023-06-30T23:19:33Z

As always, I'm a little short on time to complete the project on time. Some parts are missing for final assembly. Therefore, I publish a test assembly for demonstration. {gallery}Assembly (read more)

Raspberry Pi-based Experiment Logger and Analyzer with Remote Lab Control: Ready, Set, Go!

2023-06-30T22:00:02Z

Blog List: 1. Raspberry Pi-based Experiment Logger and Analyzer with Remote Lab Control 2. Raspberry Pi-based Experiment Logger: Glimpses of the Kit 3. Raspberry Pi-based Experiment Logger: Wiring up Raspberry Pi 4 B 4. Raspberry Pi-ba...(read more)

Pollinator Pollster, Part 8: Summary and Conclusion

2023-06-30T12:37:08Z

Pollinator Pollster (Powered by Pi) In this, the final post for this project, I would like to firstly share with you the web domain for https://pollinatorpollster.cloud/, this is the website hosted on the Raspberry Pi 4 on which you can see the data ...(read more)

PiBCI - Post #7 - Summary

2023-06-30T08:02:54Z

Introduction For this project, I wanted to work on creating a device and a GUI that are fairly cheap and easy to use to conduct neuroscience projects. When I was working for my bachelor's senior design project, I was using a BCI from the lab that cos...(read more)

Blog #6 Final blog

2023-06-30T04:42:00Z

This will be a rather short blog post. In the previous one, I briefly discussed the challenges of communication. I also read a very insightful comment that I will take into account for future projects where I need to observe the behavior of microcont...(read more)

Blog #5 - Pi-Sense: A Raspberry Pi-based Environmental Monitoring System for Scientific Experiments

2023-06-30T03:57:15Z

Final product In this final blog, I would like to showcase the completed Project in a video. Thank you very much for your attention :) community.element14.com/.../Pi_2D00_Sense.mp4(read more)

AI vision Reflective Telescope #3 Design and Build the Structure

2023-06-30T03:44:47Z

Design and Build the Structure Table of Contents 1 Design the Reflective Telescope 2 Build the Structure 3 Run the Python Code 4 Put Together 5 Summary 1 Design the Reflective Telescope Thank for the freeware Mynewton, the design can ...(read more)

Blog #4 - Pi-Sense: A Raspberry Pi-based Environmental Monitoring System for Scientific Experiments

2023-06-30T01:56:10Z

Web Interface In this blog, I want to show you an improvement I added to my project, which is uploading sensor data to the web. I feel that having the data on the screen and the monitor connected to the Raspberry Pi is something simple, it could be d...(read more)

Pollinator Pollster, Part 7: Up and Running

2023-06-29T06:42:10Z

Pollinator Pollster This is going to be a technically-focused blog, walking through each major system element in the detection process, which I wanted to cover in detail now that the prototype sensor is 'live' and installed in the garden for ...(read more)

Sci-Pi GPT - 5 TinyStories LLM + RPi 4 = Perfect for STEM

2023-06-29T02:49:15Z

GPT4ALL + RP4 = Dead End (for now) I've tried different LLM models with GPT4ALL and so far I was not able to find one, which can process inference on RPi 4B fast enough. I've described some of these tests in my previous blog post. I was close t...(read more)

Portable Environmental Monitoring System: Blog#3 - Getting It Together

2023-06-28T10:59:07Z

In this blog, we shall see how to assemble all the parts identified in the previous blog. The first device that we will assemble is the UPS Plus V6 For Raspberry Pi. And followed The steps to assemble this hardware are pretty straightforward. Can qui...(read more)

PiBCI - Post #6 - Connecting Huzzah32 board to Raspberry Pi4 and Plotting on GUI

2023-06-27T14:40:48Z

Introduction As mentioned on Post #1 and #2, I wanted to develop a device easy to use and powerful. The most common portable BCIs on the market connect to PC via Bluetooth using a Bluetooth dongle. I wanted to remove a dongle because I see it really ...(read more)

Blog #5 I2C Attiny 85 Communication

2023-06-26T19:44:59Z

In this blog, I would like to discuss the limited resources available when working with a basic microcontroller like the ATtiny85. I was surprised to find that while communication is straightforward with other boards, it is not as simple when it come...(read more)

Blog #4 testing the electronics almost done

2023-06-26T19:24:04Z

Last time, I mentioned that I would try to build something on a breadboard to demonstrate its functionality. So, I took on the task of constructing my circuit using local components. It was quite challenging to find the IR2104 driver, and although I ...(read more)