/challenges-projects/design-challenges/sci-pi-design-challenge/b/blog/posts/any-measurement-to-pi---blog-2-preparing-the-raspberry-piThis is the second blog for Sci-Pi Design Challenge. In this blog post I will complete the basic setup of my Raspberry Pi 4. If you are new in Raspberry Pi this blog can help you. If you are an experienced Pi user you can skip this blog. The followinen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/sci-pi-design-challenge/b/blog/posts/any-measurement-to-pi---blog-2-preparing-the-raspberry-piSun, 21 May 2023 07:45:28 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:073ee375-f406-4d14-991e-e92ac7262eaetaifur0<p>Two important command: use <em><strong>sudo halt&nbsp; </strong></em>or<strong></strong><em><strong> sudo poweroff</strong></em> to turn off your pi and <em><strong>sudo reboot</strong></em> to restart your pi from the SSH terminal.</p><img src="https://community.element14.com/aggbug?PostID=25988&AppID=402&AppType=Weblog&ContentType=0" width="1" height="1">