/challenges-projects/design-challenges/sixth-sense-design-challenge/b/blog/posts/sixth-sense-graffitibot---st-sensor-tile-app---blog-7Two of the PCBs I designed for the GraffitiBot came in but I won&#39;t have enough components to assemble them until at least next week. Here is what they look like: One interfaces to the load cell and one interfaces to the magnetic angle sensor. Whi...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/sixth-sense-design-challenge/b/blog/posts/sixth-sense-graffitibot---st-sensor-tile-app---blog-7Tue, 19 Feb 2019 15:06:36 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:cd5b1c31-4e9e-4aba-87ef-90f3f47f92c114rhb1<p>Hi Douglas,</p><p>&nbsp;</p><p>Nice PCB work there.</p><blockquote class="jive-quote"><p>I will need to dig through the code to figure out the format and change the output to a normal UART for the main MCU.</p></blockquote><p>This is the point I am also currently stuck at and in <a class="jive-link-blog-small" href="/challengesprojects/design-challenges/sixth-sense-design-challenge/b/blog/posts/r2b4-2---getting-ready-to-build">R2B4 #2 - Getting Ready to Build</a>&nbsp; I have printed a screen shot of the data as gathered on the terminal app PuTTY. I don&#39;t think that example had the UART activated and so I was completly lost as to how to actually add it in. I&#39;d be interested to know if you overcome this and likewise if I manage it I&#39;ll let you know. The AlgoBuilder webinar looks promising as well.</p><p>&nbsp;</p><p>Rod</p><img src="https://community.element14.com/aggbug?PostID=6451&AppID=214&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/sixth-sense-design-challenge/b/blog/posts/sixth-sense-graffitibot---st-sensor-tile-app---blog-7Sun, 03 Feb 2019 20:39:07 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:cd5b1c31-4e9e-4aba-87ef-90f3f47f92c1DAB0<p>Good update Douglas.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=6451&AppID=214&AppType=Weblog&ContentType=0" width="1" height="1">