/challenges-projects/design-challenges/sixth-sense-design-challenge/b/blog/posts/introduction-to-sensortile-connection-with-mobile-appIntroduction:The SensorTile is a tiny, square-shaped IoT module that packs powerful processing capabilities leveraging an 80 MHz STM32L476JGY microcontroller and Bluetooth low energy connectivity based on BlueNRG-MS network processor as well as a widen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/sixth-sense-design-challenge/b/blog/posts/introduction-to-sensortile-connection-with-mobile-appMon, 04 Mar 2019 18:04:51 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b3e92a35-3585-4682-a5e7-28b0223ab49714rhb0<p>Great to see the data being sent from SensorTile to email.</p><p>&nbsp;</p><p>Do you have plans for using the STM32F411RE-Nucleo with this BLE capability. After flashing up the demo and Android App I could get the BLE to work but was unsure how that functionality could be brought back to the Nucleo board (which is where the rest of my robot code will be running). I guess the BLE data could be sent from the SensorTile to a modified Android App, used and sent BLE data back to the SensorTile. Also requiring the SensorTile code to be modified to receive that bespoke BLE data ?</p><p>&nbsp;</p><p>Rod</p><img src="https://community.element14.com/aggbug?PostID=6589&AppID=214&AppType=Weblog&ContentType=0" width="1" height="1">