Sixth Sense GarffitiBot - First Dry Run - Blog17

RE: Sixth Sense GarffitiBot - First Dry Run - Blog17

shabaz — Sun, 24 Mar 2019 15:54:39 GMT

Hi Doug,

This is looking great! Good luck with the hydraulics!

RE: Sixth Sense GarffitiBot - First Dry Run - Blog17

jw0752 — Sun, 24 Mar 2019 05:40:57 GMT

Hi Doug,

If you haven't already considered this you might want to use a duckbill check valve on your jets. They provide a slight back pressure so that there is less chance of a gravity siphon. Here are some that are used on the oil lines of a chain saw.

https://www.ebay.com/i/253803363604?chn=ps

John

RE: Sixth Sense GarffitiBot - First Dry Run - Blog17

14rhb — Sat, 23 Mar 2019 23:27:38 GMT

That is really nimble and fast. It's a good job Graffitibot didn't have the paint mechanism set up - your nice floor would have got a bit messy [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-aeec1c42-3249-4240-8c58-33a90fdee6d2/contentimage_5F00_938.png:16:16]

Rod

RE: Sixth Sense GarffitiBot - First Dry Run - Blog17

three-phase — Sat, 23 Mar 2019 21:03:10 GMT

You seem to have everything well under control. Good luck with the next stage of the project.

Kind regards.

RE: Sixth Sense GarffitiBot - First Dry Run - Blog17

genebren — Sat, 23 Mar 2019 20:30:04 GMT

Looking good! Seems like steering and drive are stable and responsive. Good luck as you tackle the hydraulics.

Gene