Blog

Sudden Impact Wearables Design Challenge Musings

dougw — Mon, 10 Aug 2015 04:53:00 GMT

Sudden Impact Wearables Design Challenge Crown Tools and Heart ReactorThe sudden impact wearables design challenge faded from view as the evaluation process took a couple of months. The winners were announced but not widely broadcast and the evaluati...(read more)

Sudden Impact Design Challenge Project Round Up!

patkelly — Mon, 27 Jul 2015 13:09:47 GMT

Round up of the final projects from the Sudden Impact Design Challenge filmed at Leeds Beckett University.www.youtube.com/watch Read all the latest news from this design challenge here.(read more)

Concluding the Evaluation

Former Member — Sun, 26 Jul 2015 18:36:46 GMT

Last week our team of judges had several meeting, in which we discussed the results of the evaluation and tried to put fair scores to the criteria. These criteria had only loosely been defined in the challenge, and our own challenge was now to ensure...(read more)

Evaluation is now completed

Former Member — Tue, 21 Jul 2015 00:13:45 GMT

Last week we had two sessions in the Biomechanics Lab, and we have now completed all of the tests that we wanted to do. We did begin to prepare the evaluation report, and we had one meeting in which our team of evaluators did discuss the results of t...(read more)

And more pictures...

Former Member — Mon, 13 Jul 2015 19:57:59 GMT

Here is the link to the Dropbox folder in which I will put more pictures of the evaluation. These pictures are in full resolution. https://www.dropbox.com/sh/s501jg5d229ruye/AABPK_yhkQfipMUd3pNPgd0-a?dl=0(read more)

Pictures from Evaluation

Former Member — Mon, 13 Jul 2015 19:55:17 GMT

Here are a few pictures that I took during the evaluation last week.Unfortunately posting photos here on this blog requires downsizing them to below 2MB. Therefore not many pictures here - but I am preparing a folder on Dropbox where more pics will b...(read more)

Evaluation update

Former Member — Sun, 12 Jul 2015 01:56:54 GMT

In the past week, Julian did further work on the electronics and networking aspects of the devices. Then Mike and Athanassios did the first analytical measurements in the Biomechanics Lab. Joanne is on travel, will be back next week.In the Biomechani...(read more)

Evaluation Update

Former Member — Sat, 04 Jul 2015 00:31:39 GMT

This past week was very little activity regarding the evaluation. Athanassios and Joanne are on travel, and the Biomechanics Lab is booked for other events. So we will only be able to continue and complete the evaluation in the next two weeks when ev...(read more)

Pictures from evaluation

Former Member — Fri, 26 Jun 2015 22:45:52 GMT

Dear all, here are a few pictures from the evaluation so far. The boxes had all arrived at Leeds Beckett University by 17 June 2015. Now the opening could start.Here are a few "inhabitants" of the Biomechanics Lab in the Sch...(read more)

Evaluation Progress

Former Member — Wed, 24 Jun 2015 23:49:23 GMT

Dear all, here is an update on the progress regarding the evaluation of the Sudden Impact Challenge devices. After the shipments have arrived at Leeds Beckett University last week and after all the related shipping issues have been solved (...(read more)

[real_time_monitor] Real Time Player Monitoring System Post#18 : User manual and Setup instructions

ravi_butani — Fri, 29 May 2015 12:19:44 GMT

<< Previous Post Table of ContentsReal Time player Monitoring SystemUser ManualIntroduction:“Real time player monitoring system” is low cost open source project for measure and notifies vital body parameters of sport person or entire team (i.e. ...(read more)

Skier impact monitor 16 - short introduction and manual

hlipka — Wed, 27 May 2015 06:33:10 GMT

(Complete list of all blog entries in this series)Leeds university asked for a short introduction and a short manual. Instead of just handing this over directly, I thought it a good idea to add this here as reference. It actually serves as a good sta...(read more)

Sudden Impact Challenge Evaluation

Former Member — Wed, 13 May 2015 08:50:35 GMT

Dear all, my name is Reinhold Behringer, and I am leading the evaluation of the Sudden Challenge entries here at Leeds Beckett University. We do have a team of 4 evaluators who are members of staff at Leeds Beckett in the following areas:Co...(read more)

Smart Clothes - FINAL - Full and complemented documentation with attachment

konorengineer — Fri, 08 May 2015 23:50:11 GMT

Sudden Impact Wearables Design ChallengeSmart Clothes projectNorbert Kovács 1st of December, 2014 — 8th of May, 2015 Preface First of all, I would like to thanks to element14 and the supporters (Anal...(read more)

EasyConfigure - Remote Sensor Unit Fail - Workaround demonstration

tomaja — Fri, 08 May 2015 23:32:09 GMT

Previous posts:EasyConfigure - Modular/Configurable System Intro EasyConfigure - Hardware Components EasyConfigure - BASH scripting EasyConfigure - MQTT test setup EasyConfigure - Remote sensor unit preparation EasyConfigure - Configurator EasyConfigure - ...(read more)