[real_time_monitor] Real Time Player Monitoring System Post#1 : Introduction

RE: [real_time_monitor] Real Time Player Monitoring System Post#1 : Introduction

DAB — Tue, 02 Dec 2014 21:44:33 GMT

Very good Post.

All I would ask is for you to use a little larger type for the description.

When you get older, you will understand. [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-c54cac79-ee20-44f8-96d0-87990d8b7801/contentimage_5F00_3.png:16:16]

DAB

RE: [real_time_monitor] Real Time Player Monitoring System Post#1 : Introduction

sunnyiut — Tue, 02 Dec 2014 17:25:09 GMT

Hello Ravi,

it sounds awesome to me.

however, I am not so sure, but may be lithium-ion battery will be better than li-po for this project. Because you don't require too much current at an instance in your design. That's what i had figured so far. Whereas li-po batteries are of high C ratings normally used where we need to draw much current instantly. Though some people say that it holds the charge better than li-ion, but li-ion is known to be having better longevity.

Also, li-ion is cheaper and some of these are protected by internal charge controller / thermal shutdown [like old Nokia BL 5CT batteries]. Li-po has some issues of being explosive too, I think.

On the other hand Li-po battery is smaller than Li-ion.

WOW! you have put $100 for PCB fabrication. Sigh..... I don't have hi-tech PCB fabrication facilities here [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-c54cac79-ee20-44f8-96d0-87990d8b7801/contentimage_5F00_2.png:16:16].

I have to build the prototypes on single layer PCB by myself as usual, that's painful.

RE: [real_time_monitor] Real Time Player Monitoring System Post#1 : Introduction

hawkeyethehacker — Tue, 02 Dec 2014 16:15:50 GMT

Hi Ravi, Very good project plans here.

May I ask where you are sourcing the ECG Probes from?