/challenges-projects/design-challenges/summer-of-green-tech-design-challenge/b/blog/posts/blog-3-sunray-bender-building-the-physical-deviceTo make mirror move in azimuth and elevation, I needed to mount it on a gimbal with those degrees of freedom. I figured that the wood would be easier to work with than metal. Also, I don&#39;t have a 3D printer which means I can&#39;t build it using plastic en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/summer-of-green-tech-design-challenge/b/blog/posts/blog-3-sunray-bender-building-the-physical-deviceThu, 19 Oct 2023 18:35:47 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:01ce3257-4b90-4d1c-9ca8-4f3fdbe5e43bDAB1<p>Nice build, but as you can see, you are getting mirror deflection, which will reduce the amount of light on the areas you want.</p><img src="https://community.element14.com/aggbug?PostID=27055&AppID=414&AppType=Weblog&ContentType=0" width="1" height="1">