RE: Under Pressure - BLOG# 1 - BPM Uno – INTRODUCTION

DAB — Sun, 02 Oct 2022 17:51:54 GMT

Good plan, I look forward to the build.

RE: Under Pressure - BLOG# 1 - BPM Uno – INTRODUCTION

skruglewicz — Sat, 01 Oct 2022 21:32:43 GMT

Hello fellow Under Pressure Challengers

[mention:5a1cfe9081a4403c8a680a2b4d1abcfe:e9ed411860ed4f2ba0265705b8793d05] [mention:accc173495634578afe49e8dbd61da4f:e9ed411860ed4f2ba0265705b8793d05] [mention:1fea68f71fde47f2beff1fc2c7890056:e9ed411860ed4f2ba0265705b8793d05] Cristi

I just received my Kit today via UPS.... Hooray..

The Arduino Uno Shield is not connecting properly to the Uno. The Shield comes with 4 headers, used to connect the Shield to the UNO. A solid connection to the UNO cannot be established with the headers provided. The problem is, the header pins are not long enough , so the shield does not clear the USB Connector and the Power barrel on the Uno. My solution is to use my Grove Base Shield and then stack this Shield onto it. as I've shown in this blog.

I hope you can get your Shields attached to the Uno properly. I'd be interested in what solutions you come up with.

Cheers

Steve K

RE: Under Pressure - BLOG# 1 - BPM Uno – INTRODUCTION

osjef — Sat, 01 Oct 2022 17:25:30 GMT

Great intro, looks like you've made some good progress already! Looking forward to seeing it evolving.

P.S. I can't see the video