/challenges-projects/design-challenges/summer-of-sensors-design-challenge/b/blog/posts/summer-of-sensors-design-challenge---blog-no-5Hello everyone! In this blog I present to you what I have worked on, a blog also about the MAX30102, and as in the case with the MAX30100, I made a graphic interface. I followed the same route, the graphic interface created contains a tab named MAX30en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/summer-of-sensors-design-challenge/b/blog/posts/summer-of-sensors-design-challenge---blog-no-5Sat, 12 Nov 2022 18:14:33 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:10b70bc1-94e3-40fe-82c1-a19f5433d784rsjawale241<p>I have never used the SpO2 sensor from Maxim but I have seen many projects built around it. I&#39;m not sure if it&#39;s calibrated or it requires calibration for getting accurate SpO2 readings?</p><img src="https://community.element14.com/aggbug?PostID=24772&AppID=381&AppType=Weblog&ContentType=0" width="1" height="1">