Forum - Recent Threads

How to use xmc4200 with shield2go sensors

cyberwizard — Wed, 09 Sep 2020 05:38:46 GMT

I understand how to code in DAVE for xmc4200, but I don't understand how to code it to integrate the shield2go sensors.

I get that the shield2go can communicate via uart, i2c, or spi, but I don't understand how to implement the communication between the xmc4200 with the shield2go sensors.

the shield2go documents aren't helping because it is all implemented in arduino and I don't have the my IOT adapter.

plz helpz.

Controlling DC Motor Shield using XMC4700 programmed by DAVE

wanfp97 — Sun, 30 Aug 2020 15:27:42 GMT

Hi,

Do anyone have successfully control the DC Motor shield using XMC4700 programmed by DAVE? I can control it using example code in Arduino IDE, but there Arduino can only have 2 interrupt pins. And I also couldn't find Free RTOS library for XMC4700 in Arduino IDE. It would be great if someone can teach me to do it in DAVE. Thanks in advance.

Sincerely,

Fook Peng

Infineon - Technical Support Thread

rati89 — Tue, 18 Aug 2020 11:59:06 GMT

Hello everyone,

I created this thread here for technical support regarding Infineon hardware for the element14 sustain the world challenge.

Please post all questions here, if you got issues and problems.

However, part of the challenge is also to come along with the hardware by yourself! To don't get overwhelmed by too many questions,

I want to encourage you all, that you are trying to solve small problems as well as possible by yourself first!

Furthermore, even though it's a competitive challenge, helping each other is also possible and welcome!

jd_tech_support_ifx and me will try to answer your questions!

Good luck to everyone!

Mr. Brew

Organizer Update - Addition to Kit and Short Delay

e14phil — Fri, 19 Jun 2020 13:46:30 GMT

Hello Applicants.

I am posting today to inform you of the status of the Sustain The World - Design Challenge.

We have just about chosen all the applicants and will be announcing them in 2 Weeks Time, around 1st of July
We will be adding the KIT_XMC47_RELAX_LITE_V1 to the Kit free of charge for sponsored challengers .
To make up for lost time while shipping of the new kit we will be adjusting the challenge dates.
These dates and challengers will be announced early July.

Thanks

e14Phil

How to save planet with 140 billion Xmc4200 processors

gweinreb — Thu, 04 Jun 2020 15:51:58 GMT

To decarbonize USA you could coat 25% of Nevada with solar PV, and this would require 140 billion xmc4200, as described below. Page 2 talks about solar on land, mass produces, with Xmc4200 every 2 square meters of land.

http://www.ma2.life/doc/research/ma2/BiPV_and_LiPV_Development_Initiative_Ma2.pdf

25% of Nevada is 280 billion square meters, so you would need 140 billion of the xmc4200.

One way to stop burning all CO₂ in USA is to cover 25% of Nevada with solar PV (74K km² land, 37K km² PV) and then use the electricity to make H₂ gas. This gas could then be transported throughout America to power vehicles, heat homes, and generate more electricity. The electricity generated would be ~3 times more than what America currently generates since this system would be replacing energy we currently obtain from burning natural gas, coal, oil, and gasoline (10.4K vs 3.8K TWhr/yr). The solar parts and labor might cost ~$3.7T ($150B/yr over 25yrs, $0.50/Watt, 7.4TW capacity). However, this does not include the following costs: electrolysis to make H₂ (currently costly), transportation of H₂, maintenance of solar, and land. This solves the following problems: US decarbonization, energy storage (H₂ is storage), limited rare earth metals for many EV batteries (cars run on H₂), significant electrical grid expansion (no longer needed), and disruption to communities from locally based wind/solar/nuclear. The disadvantage is cost -- consumers might see a doubling of energy prices, which is politically unacceptable at this time.

For calculations that show how this works with xmc4200, see the below spreadsheet. Click on topics in the 1^st 30 rows to get to discussions on listed topic.

http://www.ma2.life/doc/Common/Manhattan2_All_Research_Files/Manhattan2/Research_Lab/Glenn_Weinreb/GWeinreb_Manhattan2_ResearchNotes.xlsx

To discuss further, email me at gWeinreb@Manhattan2.org

Inquiry regarding registration for Sustain The World - Design Challenge

ylsrikanth1992 — Sun, 17 May 2020 22:33:21 GMT

Hello,

Kindly answer the following inquiry regarding the application.

1. We are a team of 5 members is one application sufficient for registration?

2. If we need extra components apart from prescribed ones, will it be sponsored by the organizer?

Thank you in advance.