/challenges-projects/design-challenges/texas-instruments-safe-sound-wearables-design-challenge/b/blog/posts/safe-and-sound-winter-survival-suit-post-8This week’s update is about the temperature sensors and dealing with the possibility of moisture issues. First is the temperature sensors: I finally received the temperature sensors yesterday!! I have been working most of today with Energ...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/texas-instruments-safe-sound-wearables-design-challenge/b/blog/posts/safe-and-sound-winter-survival-suit-post-8Sun, 23 Apr 2017 18:21:24 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:639cc3e7-7e85-4a1a-a0e8-371b86c160b0DAB1<p>Nice update and interesting find on the moisture sealant.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=2926&AppID=150&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/texas-instruments-safe-sound-wearables-design-challenge/b/blog/posts/safe-and-sound-winter-survival-suit-post-8Sun, 23 Apr 2017 09:13:56 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:639cc3e7-7e85-4a1a-a0e8-371b86c160b0mcb11<p>I usually run all three wires, the +5v, Data and ground.</p><p>I haven&#39;t run it in &#39;parasitic&#39; mode and as I understand only works well with a single sensor.</p><p>&nbsp;</p><p>&nbsp;</p><p>The 4k7 is a pull-up but if there are multiple devices on the bus, it can be lower.</p><p>&nbsp;</p><p>I think we had someone running a large number of Dallas One Wire temperature sensors in the Forget Me Not challenge.</p><p>Have a look there as there may be some clues.</p><p>&nbsp;</p><p>Mark</p><img src="https://community.element14.com/aggbug?PostID=2926&AppID=150&AppType=Weblog&ContentType=0" width="1" height="1">