Twist, Turn and Move Design Challenge with TE Robotics

Welcome to

Use your robotics skills to make that machine move!

See how our winners used the TE Connectors kit, an Arduino Uno, and Robotics Shields to build a mobile robot or arm that performs a specific task.

Forum - Thread List

Suggested Answer

Shipment custom clearance 0

2216 views

7 replies

Latest over 2 years ago
by hitesh.boghani
Not Answered

Alleviate shared pin problem on expansion boards...any suggestions? 0

634 views

2 replies

Latest over 2 years ago
by hitesh.boghani

Blog - Post List

I Am Sam I Am (Blog 5)

dougw

Intro This blog introduces Sammy Semaphore actually using semaphore signals to send a message. I have to apologize for skimping on showing more build steps. I am really under the weather - high fever, I can hardly think, productivity is down around 5...
- 5 Sep 2022
Pool Butler Blog #9 Twist & Turn - a unique solution for robust Arduino Uno & shield connections

robogary

The Arduino Uno R3, DFRobot DRI0017, and DFRobot DFR0502 all use .1” female sockets for IO connections. Prototype projects usually use stripped 24/26 AWG wires or pre made jumpers like these https://www.newark.com/adafruit/759/wire-ga...
- 5 Sep 2022
Rullit #5 - The software

amgalbu

In this blog, I'm writing about the software that controls Rullit 1. Introduction Rullit will follow a simple path, shown in picture The goals of the control software is to constantly monitor the limit switches, to prevent the robot from falling f...
- 4 Sep 2022
ARDUMOBO blog 4: Mounting the hardware on the truck

a33333

Connecting the engines The following photo shows the connections to the truck engines. The engines are connected to the motor driver shield using the metallic connector provided in the kit. Connecting the sensors The next photos show the...
- 3 Sep 2022
Second Blog RARM

GustavoMorales

There's been a long time since my very first post, it has been a difficult challenge in terms of getting materials and most important my kit, due to my country restrictions, but let's talk about business. In my first blog I said some things a...
- 2 Sep 2022
Sammy Semaphore Torso Demo - (Blog 4)

dougw

Intro While waiting for components I've been busy designing some 3D printed parts and wiring up some of the connectors that I do have. The first section of this blog shows one of my favorite types of connector from TE Connectivity, actually the ...
- 31 Aug 2022
Twist, Turn, & Move Design Challenge - Unlimited CNC Robot - Blog #3

dwinhold

Unlimited CNC Robot - Blog #3 Assembling the robot platform Today's update is creating and assembling the final robot platform. The previous one was for testing and making sure everything works. I received the material that is required for comp...
- 30 Aug 2022
Teleoperation Robot - Blog #2 - Twist, Turn and Move Design Challenge with TE Robotics

nilutpol_kashyap

1. The Official Challenger Kit Contents - Arduino UNO R3 Board - DFRobot 2x2A Motor Shield for Arduino Twin - DFRobot Gravity: IO Expansion & Motor Driver Shield - TE C...
- 29 Aug 2022
Rullit #4 - Building the robot

amgalbu

In this post, I am showing some picture I took during the build of the robot 1. The chassis The robot chassis is made of 10 mm plywood. I cut out all the slots and holes to mount the robot components. To limit the total height, I also created a slot...
- 29 Aug 2022
Pool Butler Blog #8 Twist & Turn - The steering system - in too much detail :-)

robogary

This is blog #8 - Everything you did and didnt want to know about the mystical and magical Pool Butler Steering system 1. The video of the steering operation in drydock. https://youtu.be/54yKQ6vUuSc 2. some photos 3. screen shots of the scope ti...
- 25 Aug 2022