Documents

Winners Announcement - Twist, Turn and Move Design Challenge

pchan — Fri, 07 Oct 2022 19:34:58 GMT

Current Revision posted to Documents by pchan on 10/7/2022 7:34:58 PM

The Twist, Turn, and Move Robotics Challenge

Please join me in congratulating the Winners of the Twist, Turn and Move Design Challenge with TE Robotics

Winners may be contacted by danzima to help facilitate postage.

Winner
amgalbu

Rullit – PV Cell Panel Cleaning Robot
8+ Blog Series

A wonderful PV Cell Panel Cleaning Robot with a fun and economic method of locomotion

Judges Comments:
The world is challenged to provide more Green Energy and the efficiency of a cell is dependent on the pollution. People are challenged to keep their cells clean and specially on roofs it is almost impossible.
The idea is great and a simple solution that has potential for more. Therefore, I would rate this project as a winner.

/challenges-projects/design-challenges/twist-turn-and-move-design-challenge-with-te-robotics/b/blog/posts/rullit-8---final-demo

Runner Up

dwinhold

Unlimited CNC
7+ Blog Series

An unlimited CNC laser cutting prototype. A CNC without boarders!

/challenges-projects/design-challenges/twist-turn-and-move-design-challenge-with-te-robotics/b/blog/posts/twist-turn-and-move-design-challenge-with-te-robotics---unlimited-cnc-robot-blog-7-final-blog

Judges Comments:

In general, I am amazed about the outcome of this exercise.
History showed that great developments sometimes started small with a good idea so I am excited to see where this goes.

Finishers

Congratulate the other folk who finished their projects and will be getting a new Multimeter for their efforts!

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

Winners Announcement - Twist, Turn and Move Design Challenge

e14phil — Thu, 06 Oct 2022 16:06:55 GMT

Revision 1 posted to Documents by e14phil on 10/6/2022 4:06:55 PM

Please join me in congratulating the Winners of the Twist, Turn and Move Design Challenge with TE Robotics

Winners may be contacted by danzima to help facilitate postage.

Winner
amgalbu

Rullit – PV Cell Panel Cleaning Robot
8+ Blog Series

/challenges-projects/design-challenges/twist-turn-and-move-design-challenge-with-te-robotics/b/blog/posts/rullit-8---final-demo

Runner Up

dwinhold

Unlimited CNC
7+ Blog Series

An unlimited CNC laser cutting prototype. A CNC without boarders!

/challenges-projects/design-challenges/twist-turn-and-move-design-challenge-with-te-robotics/b/blog/posts/twist-turn-and-move-design-challenge-with-te-robotics---unlimited-cnc-robot-blog-7-final-blog

Judges Comments:

In general, I am amazed about the outcome of this exercise.
History showed that great developments sometimes started small with a good idea so I am excited to see where this goes.

Finishers

Congratulate the other folk who finished their projects and will be getting a new Multimeter for their efforts!

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Wed, 28 Sep 2022 14:36:33 GMT

Current Revision posted to Documents by pchan on 9/28/2022 2:36:33 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	October 2022
Prizes Shipped	October 2022

The Terms

Selected official applicants will be chosen to receive the "Kit" listed above; these successful applicants will be our sponsored challengers. The sponsored challengers must use the Challenger's Kit within their project, and publish their final code and designs on the Community for others to use. Those not chosen as sponsored challengers may also join the competition and be eligible to win prizes, but they must base their projects around the Challenger's Kit (which they will obtain themselves) and adhere to all terms and conditions of the challenge.

Applicants must post their progress and final project as at least 5 blog posts before the closing date (see above), when projects are due. Challengers are strongly encouraged to post their blogs regularly during the contest period, rather than posting them all close to the finish of the competition; judges will look more favorably on those who blog regularly during the contest period.

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

If you are not successful in becoming a sponsored challenger, but still want to enter, all you need to do is use at least 5 of the TE connectivity products described above, as well as the Arduino UNO, in your project and adhere to the same Terms and Conditions for a chance to be our winner! Non-sponsored challengers are eligible for the Finisher and Winner Prizes, as well.

community.element14.com/.../TwistTurnTermsJune13.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

Twist and Turn Design Challenge - Meet the Challengers

pchan — Mon, 11 Jul 2022 15:27:42 GMT

Current Revision posted to Documents by pchan on 7/11/2022 3:27:42 PM

The Twist, Turn, and Move Robotics Challenge

Join us in Congratulating the Official Challengers of the Twist, Turn, & Move Design Challenge:

Internet Controlled Teleoperation Robot
nilutpol_kashyap

Unlimited CNC Robot
dwinhold

The Robo Cat
jwr50

Pool Butler
robogary

ARDUMOBO: Arduino mobile robot
a33333

PV Cleaning System
amgalbu

Robotic Yoga Instructor
hitesh.boghani

Sammy Semaphore - Semaphore Robot
dougw

R-Arm
GustavoMorales

Autonomous Navigation Robot
ajayvishaal

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

These 10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 11 Jul 2022 15:25:48 GMT

Revision 27 posted to Documents by pchan on 7/11/2022 3:25:48 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../TwistTurnTermsJune13.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

Twist and Turn Design Challenge - Meet the Challengers

pchan — Mon, 11 Jul 2022 15:24:44 GMT

Revision 4 posted to Documents by pchan on 7/11/2022 3:24:44 PM

The Twist, Turn, and Move Robotics Challenge

Join us in Congratulating the Official Challengers of Twist & Turn Design challenge:

Internet Controlled Teleoperation Robot
nilutpol_kashyap

Unlimited CNC Robot
dwinhold

The Robo Cat
jwr50

Pool Butler
robogary

ARDUMOBO: Arduino mobile robot
a33333

PV Cleaning System
amgalbu

Robotic Yoga Instructor
hitesh.boghani

Sammy Semaphore - Semaphore Robot
dougw

R-Arm
GustavoMorales

Autonomous Navigation Robot
ajayvishaal

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

These 10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 11 Jul 2022 14:52:09 GMT

Revision 26 posted to Documents by pchan on 7/11/2022 2:52:09 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../TwistTurnTermsJune13.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

Twist and Turn Design Challenge - Meet the Challengers

e14phil — Mon, 11 Jul 2022 14:30:20 GMT

Revision 3 posted to Documents by e14phil on 7/11/2022 2:30:20 PM

Pool Butler
robogary

ARDUMOBO: Arduino mobile robot
a33333

PV Cleaning System
amgalbu

Robotic Yoga Instructor
hitesh.boghani

Sammy Semaphore - Semaphore Robot
dougw

R-Arm
GustavoMorales

Autonomous Navigation Robot
ajayvishaal

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

These 10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

e14phil — Mon, 11 Jul 2022 13:06:02 GMT

Revision 25 posted to Documents by e14phil on 7/11/2022 1:06:02 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../TwistTurnTermsJune13.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

Twist and Turn Design Challenge - Meet the Challengers

e14phil — Mon, 11 Jul 2022 13:05:46 GMT

Revision 2 posted to Documents by e14phil on 7/11/2022 1:05:46 PM

Join us in Congratulating the Official Challengers of Twist & Turn Design challenge:

Internet Controlled Teleoperation Robot

nilutpol_kashyap

Unlimited CNC Robot

dwinhold

The Robo Cat
jwr50

Pool Butler
robogary

ARDUMOBO: Arduino mobile robot
a33333

PV Cleaning System
amgalbu

Robotic Yoga Instructor
hitesh.boghani

Sammy Semaphore - Semaphore Robot
dougw

R-Arm
GustavoMorales

Autonomous Navigation Robot
ajayvishaal

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	12nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

These 10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

Twist and Turn Design Challenge - Meet the Challengers

e14phil — Thu, 07 Jul 2022 14:36:52 GMT

Revision 1 posted to Documents by e14phil on 7/7/2022 2:36:52 PM

Join us in Congratulating the Official Challengers of Twist & Turn Design challenge:

Internet Controlled Teleoperation Robot

nilutpol_kashyap

Unlimited CNC Robot

dwinhold

The Robo Cat
jwr50

Pool Butler
robogary

ARDUMOBO: Arduino mobile robot
a33333

PV Cleaning System
amgalbu

Robotic Yoga Instructor
hitesh.boghani

Sammy Semaphore - Semaphore Robot
dougw

R-Arm
GustavoMorales

Autonomous Navigation Robot
ajayvishaal

The Dates

To make sure challengers get their kit on time we have pushed back the end dates of this challenge and will be updating the site copy and terms to correspond with this.

Project Phases	Dates
Challengers Announced	6th July 2022
Build Period	7th July - 12th September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

These 10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 13 Jun 2022 14:46:26 GMT

Revision 24 posted to Documents by pchan on 6/13/2022 2:46:26 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

10 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0017 2x2A Motor Shield for Arduino Twin (Product Image may differ)
	DFR0502 Gravity: IO Expansion & Motor Driver Shield (Product Image may differ)

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../TwistTurnTermsJune13.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 19:16:24 GMT

Revision 23 posted to Documents by pchan on 6/6/2022 7:16:24 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 17:35:20 GMT

Revision 22 posted to Documents by pchan on 6/6/2022 5:35:20 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 17:33:39 GMT

Revision 21 posted to Documents by pchan on 6/6/2022 5:33:39 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize	Prize Category
Grand Prize	Approximate Value $2100 USD* Flash Forge Guider II 3D Printer iRobot Roomba Self Emptying Robot Vacuum Clearer
Runner Up	Approximate Value $500 USD* iRobot Bravaa Jet Robot Mop Ender 3 V2 3D Printer
Finisher Prize To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.**	Approximate Value $30 USD* Multicomp Pro Multimeter

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 17:23:47 GMT

Revision 20 posted to Documents by pchan on 6/6/2022 5:23:47 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit (Product Image may differ)	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 16:46:49 GMT

Revision 19 posted to Documents by pchan on 6/6/2022 4:46:49 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit	Dynamic Connectors Parts: 1-2366515-4 Connector Housing 2367817-2 Contact 2-2366515-4 Connector Housing 1-2366600-4 Connector Housing 2367819-2 Contact 2-2366600-4 Connector Housing 1891526-1 Extraction Tool 1-2366515-8 Connector Housing 2-2366515-8 Connector Housing 1-2366600-8 Connector Housing 2-2366600-8 Connector Housing More Items: AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 16:34:17 GMT

Revision 18 posted to Documents by pchan on 6/6/2022 4:34:17 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit	AXICOM IM Signal Relay M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector 201328-1 Multimate Contact Type II 201330-1 Contact Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 15:03:20 GMT

Revision 17 posted to Documents by pchan on 6/6/2022 3:03:20 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit	AXICOM IM Signal Relays M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 Circular Connector Size 11 M8 Series Connector Male (Sensors) M8 Series Connector Female M8 Series Connector Male M8 Series Connector Female D-Sub Connector D-Sub Connector Extraction Tool 201330-1 CONTACT Wired-Board Connector Receptacle FFC/FPC Connector Pin Header
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge

The Twist, Turn, and Move Robotics Design Challenge with TE Connectivity

pchan — Mon, 06 Jun 2022 14:15:28 GMT

Revision 16 posted to Documents by pchan on 6/6/2022 2:15:28 PM

Make that machine move using TE Connectivity!

The Twist, Turn, and Move Robotics Challenge

community.element14.com/.../TE-Robotics.mp4

The Challenge

Each participant will receive a Challenger’s Kit, with which they are challenged to design and build a robotic arm or mobile robot that performs a specific task.

15 successful applicants will get a Selection of TE Connectors, an Arduino Uno, and Robotics Shields, free of charge, to build and blog their project with.

For the chance to win one of the prizes below, participants must blog their build process, as well as the final outcome of their Robotic Movement Project.

Included in the Challenger's Kit are a Selection of TE-provided components, as well as an Arduino Uno; use these to create your Robotic Movement Project.

Good integration of the TE components and interesting uses of movement will be graded more favorably.

Example tasks that can be performed include, but are not limited to:

Building a robot arm that can pick up and set down an object
Building a robot arm that moves in all degrees of freedom
Building a mobile robot that follows a line
Building a mobile robot that can avoid an object in its path

Challenger's Kit The Kit	Product Name
TE Connectors Kit	AXICOM IM Signal Relays M4473 SL005 Multipair Cable Circular Plastic Connector Series 1 M8 Series Connector (Sensors) D-Sub Connector Extraction Tool 201330-1 CONTACT Wired-Board Connector
	Arduino Uno Buy Now
	DRI0009 Expansion Board (Product Image may differ) Buy Now
	Quad DC Motor Driver Shield Buy Now

The Prizes

Prize

Prize Category

Grand Prize

Approximate Value $2100 USD*

Flash Forge Guider II 3D Printer
iRobot Roomba Self Emptying Robot Vacuum Clearer

Runner Up

Approximate Value $500 USD*

iRobot Bravaa Jet Robot Mop
Ender 3 V2 3D Printer

Finisher Prize**

To be a finisher you must complete 5 blogs and show us your testing the resilience of the project.

Approximate Value $30 USD*

Multicomp Pro Multimeter

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

element14 Community Judges
element14 Community Team

The Dates

Project Phases	Dates
Application Period	6th May 2022
Application Deadline	20th June 2022
Challengers Announced	24th June 2022
Build Period	24th June 2022 - 2nd September 2022
Projects Due	2nd September 2022
Winners Announced	September 2022
Prizes Shipped	September 2022

The Terms

Projects that use the Challenger's Kit most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

community.element14.com/.../4442.TwistTurnTerms.pdf

Tags: turn, twist, te connectivity, robotics design challenge, and move design challenge