/challenges-projects/design-challenges/upcycleit/b/blog/posts/upcycle-it-interactive-race-car-driver---we-have-the-technology-to-rebuild-himAfter the various modifications, repairs and tests it was time to put the Furby back together. The speaker wires were soldered in place and all the cables hot glued to act as a basic strain relief. A hole was made through the battery box to route theen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/upcycleit/b/blog/posts/upcycle-it-interactive-race-car-driver---we-have-the-technology-to-rebuild-himFri, 02 Jun 2017 19:07:05 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:94529592-4108-4ded-9810-400b08a042d8DAB0<p>Great update Andy.</p><p>&nbsp;</p><p>Getting everything back together is a good step.</p><p>&nbsp;</p><p>Now you just need to put the fur back to hide all of the seams and you are good to go.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=3101&AppID=147&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/upcycleit/b/blog/posts/upcycle-it-interactive-race-car-driver---we-have-the-technology-to-rebuild-himFri, 02 Jun 2017 14:54:28 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:94529592-4108-4ded-9810-400b08a042d8jasonwier921<p>Nice write up.&nbsp; At this point, keep it simple and get it finished.&nbsp; Then add in bells and whistles, you are getting so close. I cannot wait for the demo!</p><img src="https://community.element14.com/aggbug?PostID=3101&AppID=147&AppType=Weblog&ContentType=0" width="1" height="1">