/challenges-projects/design-challenges/upcycleit/b/blog/posts/pdu-14---thoughts-and-visions-upcycle-itWhat It WasBefore I started this challenge, the PDU was in working condition. It could be controlled remotely by telnet, http web interface, and SNMP. My goal was to make it into something that can be used with today&#39;s standards and more.&amp;n...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/upcycleit/b/blog/posts/pdu-14---thoughts-and-visions-upcycle-itSat, 03 Jun 2017 17:02:26 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1390e032-b9e0-49ee-a1da-134a52907598DAB0<p>Very good update.</p><p>&nbsp;</p><p>I like the simple structure.&nbsp; It should make it much easier to upgrade and modify.</p><p>&nbsp;</p><p>I am a little concerned with the power distribution, especially with a 15A limit.&nbsp; You might consider putting some form of current estimation on each outlet so that you can make sure you do not exceed total current available.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=3124&AppID=147&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/upcycleit/b/blog/posts/pdu-14---thoughts-and-visions-upcycle-itSat, 03 Jun 2017 14:44:19 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1390e032-b9e0-49ee-a1da-134a52907598Workshopshed0<p>Great project and results Jason.&nbsp; Thanks for the offer of help with BlueTooth. I&#39;ll likely switch over to that at some point in the future as I want to keep power consumption down.</p><img src="https://community.element14.com/aggbug?PostID=3124&AppID=147&AppType=Weblog&ContentType=0" width="1" height="1">