/challenges-projects/design-challenges/wireless-power-i/b/blog/posts/qipi2---qi-battery-charged-and-powered-512mb-raspberry-piHello World, Last Week I made a Wireless Power Raspberry Pi. I also made that night a Battery Powered and Qi Charged Raspberry Pi. I would like to show my test setup to see if it would work. This is by no means a good way to do this but I wanted...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/wireless-power-i/b/blog/posts/qipi2---qi-battery-charged-and-powered-512mb-raspberry-piWed, 24 Oct 2012 09:50:42 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:4bd25f36-6855-40a8-a751-062324690467COMPACT1<p>Chad, </p><p><span>I think you have a typo in your blog. The LP38690 is an LDO Linear regulator that can&#39;t step up an input voltage lower than it&#39;s output voltage. For 5 volts out the minimum input voltage is about 5.5 volts.</span></p><p>&nbsp;</p><p>Cheers</p><p>&nbsp;</p><p>Compact</p><img src="https://community.element14.com/aggbug?PostID=15633&AppID=114&AppType=Weblog&ContentType=0" width="1" height="1">