Waterproofing marine equipment -11- Receiver board assembly and testing

RE: Waterproofing marine equipment -11- Receiver board assembly and testing

n.donthi@prothelis.de — Mon, 01 Feb 2016 13:15:56 GMT

Nice work [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-43ededb2-c25e-4505-8e31-42ccfe0650e3/1651.contentimage_5F00_1.png:16:16]

but i had a problem when we made similar circuit but in even smaller size, The pcb is having the Receiver is heating up is there any way to reduce the heating of the pcb ??

RE: Waterproofing marine equipment -11- Receiver board assembly and testing

janisalnis — Tue, 17 Jun 2014 22:50:58 GMT

Hi!

Like your post!

I would like to build Lipo charger. From your blog I understand there is a chip converting rx coil energy directly to 4.2V instead of 5V.

I am confused as google does not find datasheets for parts bq50050B and bq50013B ICs you mention.

RE: Waterproofing marine equipment -11- Receiver board assembly and testing

waelect — Sun, 01 Jun 2014 01:25:22 GMT

Very nice, well done especially in getting it working the first time [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-43ededb2-c25e-4505-8e31-42ccfe0650e3/contentimage_5F00_1.png:16:16]

RE: Waterproofing marine equipment -11- Receiver board assembly and testing

mcb1 — Sat, 31 May 2014 22:51:26 GMT

Very tidy.

Well on your way to the finish line now.

Mark

RE: Waterproofing marine equipment -11- Receiver board assembly and testing

DAB — Sat, 31 May 2014 19:15:46 GMT

Nice work.

My hands are way too big to tackle anything that small, but it looks like you did a good job.

DAB