/challenges-projects/design-challenges/wireless-power-ii/b/blog/posts/wireless-charging---status-update-3Time for another status update. Unfortunately the last few days can be summed as &quot;it does not work&quot; My plan for the last days was to populate one functional component after each other on the PCB, and verify that they work as intended. Sound...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/wireless-power-ii/b/blog/posts/wireless-charging---status-update-3Wed, 25 Jun 2014 12:06:18 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e3a928be-ad87-411e-b17b-a5d9eb642b1bmcb11<p>Hendrik</p><p>It was a fairly ambitious undertaking, and its fair to say most designs don&#39;t work first time.</p><p>&nbsp;</p><p>I have seen IC&#39;s soldered on upside down to alleviate the&nbsp; .... oops wrong way, so maybe this is an option you could use.</p><p>&nbsp;</p><p>I&#39;m sure you will get it sorted when the pressure is off.</p><p>&nbsp;</p><p>&nbsp;</p><p>mark</p><img src="https://community.element14.com/aggbug?PostID=17958&AppID=115&AppType=Weblog&ContentType=0" width="1" height="1">