/challenges-projects/project14/circuitprototypetechniques/b/blog/posts/eyeball-thingyMy prototyping techniques are fairly limited and pretty standard: using stripboard or protoboard. One day I hope to graduate to PCBs but so far I haven&#39;t gotten around to it as learning a PCB package doesn&#39;t seem like fun. And, as they say, when the en-USTelligent Community 12https://community.element14.com/challenges-projects/project14/circuitprototypetechniques/b/blog/posts/eyeball-thingyMon, 21 Mar 2022 16:01:30 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:accc78b6-d7ca-47ac-a0b7-f415fbb9f678neilk0<p>Nice bit of fun, Dubbie.</p> <p>TinkerCad looks useful as well.</p> <p>Neil</p><img src="https://community.element14.com/aggbug?PostID=23221&AppID=344&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/project14/circuitprototypetechniques/b/blog/posts/eyeball-thingySun, 13 Mar 2022 17:36:01 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:accc78b6-d7ca-47ac-a0b7-f415fbb9f678robogary2<p>spooky Dubbie&nbsp;</p> <p>Tikibot is an Arduino project that I did some time ago with servo eyeballs&nbsp;<a href="/challenges-projects/project14/f/forum/10577/project14-volunteer-to-judge-the-animatronics-competition">/challenges-projects/project14/f/forum/10577/project14-volunteer-to-judge-the-animatronics-competition</a>&nbsp;. I was never satisfied with eyeballs that dont have eyelids.</p> <p>This is one 3D print design for blinking eyeballs that I really liked because the housing is built into the y axis direction. Nearly all other 3D print designs build in the X axis direction , making them wide. This one being deep could fit into a plastic head covered with a mask, or a pumpkin, etc&nbsp;</p> <p>The Tikibot will get a pair of these 3D printed eyes or with the high rez OLED screens........on the bucket list.</p> <p>www.etsy.com/.../diy-animatronic-eye-mechanism-print-it</p> <p></p><img src="https://community.element14.com/aggbug?PostID=23221&AppID=344&AppType=Weblog&ContentType=0" width="1" height="1">