The Windchillator - Reducing the sleep current of the Arduino MKR WIFI 1010 to 800 uA/challenges-projects/project14/iot-in-the-cloud/b/blog/posts/the-windchillator---reducing-the-sleep-current-of-the-arduino-mkr-wifi-1010-to-800-uaIn an IoT sensor application the sensor usually sleeps most of the time and wakes in regular periods for a very short time to send its measurements to the cloud. This should reduce the average current consumption to 10 - 100 uA and enable a long batten-USTelligent Community 12RE: The Windchillator - Reducing the sleep current of the Arduino MKR WIFI 1010 to 800 uAhttps://community.element14.com/challenges-projects/project14/iot-in-the-cloud/b/blog/posts/the-windchillator---reducing-the-sleep-current-of-the-arduino-mkr-wifi-1010-to-800-uaSat, 19 Aug 2023 16:17:02 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb724b26-0707-4b85-8c20-4e1dd31b1f09L0cutus0<p>if you disable the&nbsp;ECC508 chip you disable the I2C interface, at least i have discovered on my skin this thing, lost lot of hour to found the problem :)</p><img src="https://community.element14.com/aggbug?PostID=7157&AppID=227&AppType=Weblog&ContentType=0" width="1" height="1">RE: The Windchillator - Reducing the sleep current of the Arduino MKR WIFI 1010 to 800 uAhttps://community.element14.com/challenges-projects/project14/iot-in-the-cloud/b/blog/posts/the-windchillator---reducing-the-sleep-current-of-the-arduino-mkr-wifi-1010-to-800-uaSun, 09 May 2021 23:41:25 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb724b26-0707-4b85-8c20-4e1dd31b1f09scottd.nerd0<p>Thanks for this. By the way, your labels for R7 and R27 are swapped according to the board layout here -&gt; <a class="jive-link-external-small" href="https://store.arduino.cc/usa/mkr-wifi-1010" rel="nofollow ugc noopener" target="_blank" title="https://store.arduino.cc/usa/mkr-wifi-1010">https://store.arduino.cc/usa/mkr-wifi-1010</a> </p><img src="https://community.element14.com/aggbug?PostID=7157&AppID=227&AppType=Weblog&ContentType=0" width="1" height="1">RE: The Windchillator - Reducing the sleep current of the Arduino MKR WIFI 1010 to 800 uAhttps://community.element14.com/challenges-projects/project14/iot-in-the-cloud/b/blog/posts/the-windchillator---reducing-the-sleep-current-of-the-arduino-mkr-wifi-1010-to-800-uaTue, 04 Jun 2019 01:29:30 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb724b26-0707-4b85-8c20-4e1dd31b1f09ralphjy1<p>Very useful data.&nbsp; I guess that&#39;s why it makes sense to aggregate sensors using lower power mesh communication like and then having a single WiFi gateway.</p><img src="https://community.element14.com/aggbug?PostID=7157&AppID=227&AppType=Weblog&ContentType=0" width="1" height="1">RE: The Windchillator - Reducing the sleep current of the Arduino MKR WIFI 1010 to 800 uAhttps://community.element14.com/challenges-projects/project14/iot-in-the-cloud/b/blog/posts/the-windchillator---reducing-the-sleep-current-of-the-arduino-mkr-wifi-1010-to-800-uaMon, 27 May 2019 09:46:27 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bb724b26-0707-4b85-8c20-4e1dd31b1f09mayermakes0<p>Very helpful findings! I will keep that in mind for future projects!</p><img src="https://community.element14.com/aggbug?PostID=7157&AppID=227&AppType=Weblog&ContentType=0" width="1" height="1">