Blog

Continuous Servo Bot - using Arduino Nano

carmelito — Tue, 14 Aug 2018 17:11:00 GMT

In my previous blog post, I shared some pictures of the 3D printed parts I designed in Autodesk’s Fusion 360, for more info check out the blog post at – Continuous Servo Bot- 3D Printing. The idea when designing the 3D printed part...(read more)

Walky the Biped Robot - WalkyII the final chapter.

genebren — Tue, 14 Aug 2018 02:22:00 GMT

Previous post in the sequence: Walky the Biped Robot - The prequel Walky the Biped Robot - Power pack Walky the Biped Robot - Oops, Walky has an accident! Walky the Biped Robot - A new hope (actually a new body and battery) Walky the Biped Robot - W...(read more)

Converting an existing effect pedal to operate a second effects unit using a resistive strip sensor.

ipfreely — Mon, 13 Aug 2018 23:48:00 GMT

For the Movers and Shakers theme I have decided to focus on the levers and linkages component to solve the problem of needing separate pedals for multiple effects units due to different specs as well as inability to interoperate. This will demonstra...(read more)

Walky the Biped Robot - WalkyII is learning to walk again! (part 2)

genebren — Sat, 11 Aug 2018 21:37:39 GMT

Movers and ShakersEnter Your Electronics & Design Project for Your Chance to Win a $100 Shopping Cart!Back to The Project14 homepage Project14 Home Monthly Themes Monthly Theme Poll Previous post in the sequence:Walky the Biped Robot - The pre...(read more)

Walky the Biped Robot - WalkyII is learning to walk again!

genebren — Fri, 10 Aug 2018 22:52:52 GMT

Walky the Biped Robot - WalkyII gets a new brain

genebren — Sat, 04 Aug 2018 21:03:00 GMT

Jumbo Servo

Workshopshed — Tue, 31 Jul 2018 13:20:00 GMT

I was building a big project and wanted to move the nozzle of a squirting flower, and the only servos I had were micro servos which did not have enough power to move the mechanism, so I decided to build something, a Jumbo Servo. As mentioned in Mot...(read more)

Continuous Servo Bot - 3D printing

carmelito — Tue, 31 Jul 2018 05:27:35 GMT

Movers and ShakersEnter Your Electronics & Design Project for Your Chance to Win a $100 Shopping Cart!Back to The Project14 homepage Project14 Home Monthly Themes Monthly Theme Poll For the past couple of months I have been working on a servo ...(read more)

Walky the Biped Robot - WalkyII gets his legs

genebren — Sat, 14 Jul 2018 21:06:16 GMT

Walky the Biped Robot - WalkyII gets some eyes.

genebren — Thu, 12 Jul 2018 20:41:22 GMT

Walky the Biped Robot - A new hope (actually a new body and battery)

genebren — Mon, 09 Jul 2018 15:23:11 GMT

Walky the Biped Robot - Oops, Walky has an accident!

genebren — Fri, 06 Jul 2018 15:36:47 GMT

Walky the Biped Robot - Power pack

genebren — Tue, 03 Jul 2018 22:44:11 GMT

Walky the Biped Robot - The prequel

genebren — Wed, 20 Jun 2018 19:12:00 GMT

I have completely lost track of when I first started this project, but I know that it must have been more than 16 years ago. Around that time I was single and raising my son on a part-time basis. Having spare time on my hands, I spent a ...(read more)