/challenges-projects/project14/nfc-rfid/b/blog/posts/locknfc---firmwareMicrocontroller-based hardware is just a PCB until you have some firmware running on it. Time to get it doing something. I&#39;d already protyped both the capacitive touch keypad and the NFC reader firmware on a development board and I check that they raen-USTelligent Community 12https://community.element14.com/challenges-projects/project14/nfc-rfid/b/blog/posts/locknfc---firmwareFri, 14 Jun 2019 13:13:15 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f1d02aae-1434-481c-b35f-e275466ca29cluislabmo0<p>Gread project!. The Keypad/NFC reader has a very professional look.</p><p>&nbsp;</p><p>Luis</p><img src="https://community.element14.com/aggbug?PostID=7081&AppID=231&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/project14/nfc-rfid/b/blog/posts/locknfc---firmwareFri, 17 May 2019 11:06:29 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f1d02aae-1434-481c-b35f-e275466ca29cshabaz1<p>Fantastic project. Also that feature to open both at the same time is both a logical conclusion and cool : ) Doesn&#39;t matter if only one door needed opening : )</p><p>I bet it puts a smile on his face every time he sees it.</p><img src="https://community.element14.com/aggbug?PostID=7081&AppID=231&AppType=Weblog&ContentType=0" width="1" height="1">