/challenges-projects/project14/remote-monitoring-control-devices/b/blog/posts/smarthab-remote-sensing-and-control-iv-software-designOk, I have settled on the MSP-432 with the Kentec display. Out of the box the feature set is quite impressive:48MHz 32-bit ARM Cortex M4F with Floating Point Unit and DSP accelerationPower consumption: 95uA/MHz active, and 850nA RTC standby operationen-USTelligent Community 12https://community.element14.com/challenges-projects/project14/remote-monitoring-control-devices/b/blog/posts/smarthab-remote-sensing-and-control-iv-software-designThu, 04 Jul 2019 18:52:40 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:41a09d9a-360e-48d3-a8cc-83fdce6997ceDAB0<p>I am curious about what type of additional applications you intend to run that would require the horsepower of the 432.</p><p>If all you intend is UI and display I would say the 430 would be adequate, but it would limit you to any application needing more calculation or data driven responses.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=7396&AppID=237&AppType=Weblog&ContentType=0" width="1" height="1">