/challenges-projects/project14/rfidnfc/b/blog/posts/low-power-nfc-thermometerHello everyone. In this blog post I would like to describe my second project for a NFC or RFID Project14 Competition . In this project I utilized my own dynamic tag. This project tis about thermometer with output readable via NFC. Idea is that thermomen-USTelligent Community 12https://community.element14.com/challenges-projects/project14/rfidnfc/b/blog/posts/low-power-nfc-thermometerTue, 20 Dec 2022 15:46:12 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:136d5581-5f68-4941-be73-1185f697a3aemisaz0<p>EDIT 2022-12-20:</p> <ul> <li>Photo after &quot;<span>On breadboard it looks as follows:</span>&quot; was reuploaded because I failed to upload it yesterday due to site unreliability.</li> </ul><img src="https://community.element14.com/aggbug?PostID=24944&AppID=393&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/project14/rfidnfc/b/blog/posts/low-power-nfc-thermometerTue, 20 Dec 2022 01:54:15 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:136d5581-5f68-4941-be73-1185f697a3aeshabaz2<p>Nice project!</p> <p>Incidentally there are NFC ICs that have a &#39;SRAM pass-through&#39; mode, e.g. NXP ones, which would provide infinite read/write. I know this is an ST-component project, I&#39;m only mentioning it because perhaps ST have such a device with that sort of functionality too. I guess ST have really intended this particular IC to me more for EEPROM replacement for small bits of config, in which case it perfectly meets their intended applications I guess. But nice to stretch a device to see what else can be done with it too.</p><img src="https://community.element14.com/aggbug?PostID=24944&AppID=393&AppType=Weblog&ContentType=0" width="1" height="1">