/challenges-projects/project14/theholidayspecial/b/blog/posts/3d-printer-using-pieWould like to see a 3d printer being ran by a Rasberry Pien-USTelligent Community 12https://community.element14.com/challenges-projects/project14/theholidayspecial/b/blog/posts/3d-printer-using-pieThu, 21 Dec 2017 02:19:12 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a29f20f1-5217-4a87-977f-08517bfda5fedoug650<p>It has been done:</p><p>&nbsp;</p><p><a class="jive-link-external-small" href="https://www.raspberrypi.org/magpi/using-3d-printer-raspberry-pi/" rel="nofollow ugc noopener" target="_blank" title="https://www.raspberrypi.org/magpi/using-3d-printer-raspberry-pi/">https://www.raspberrypi.org/magpi/using-3d-printer-raspberry-pi/</a> </p><p>&nbsp;</p><p>article from 2 months ago.</p><img src="https://community.element14.com/aggbug?PostID=4005&AppID=189&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/project14/theholidayspecial/b/blog/posts/3d-printer-using-pieWed, 20 Dec 2017 18:13:03 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a29f20f1-5217-4a87-977f-08517bfda5feDAB0<p>Depending upon the design, there should not be any problem building a 3D printer using the RPi, though it would be a waste of most of its processing capability.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=4005&AppID=189&AppType=Weblog&ContentType=0" width="1" height="1">