Creating a cable Supported and Driven Camera with 3D Printing and a GoPro - Cablecam/challenges-projects/project14/theworldinmotion/b/blog/posts/cablecamFor this project14, I thought to build a camera that travels along a cable and take videos using a GoPro First version The starting point is the TMC2300-IOT-REF board, that I will use to drive to motor that makes the camera move along the rope....en-USTelligent Community 12RE: Creating a cable Supported and Driven Camera with 3D Printing and a GoPro - Cablecamhttps://community.element14.com/challenges-projects/project14/theworldinmotion/b/blog/posts/cablecamFri, 23 Sep 2022 17:32:32 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:51ccfa4d-3c71-4ea1-8f60-e62bb3b25626beacon_dave1<p>Excellent results and it looks a lot more affordable than the likes of a Photoship One &#39;Flyline&#39; camera rig for non-professional use.</p><img src="https://community.element14.com/aggbug?PostID=24452&AppID=386&AppType=Weblog&ContentType=0" width="1" height="1">RE: Creating a cable Supported and Driven Camera with 3D Printing and a GoPro - Cablecamhttps://community.element14.com/challenges-projects/project14/theworldinmotion/b/blog/posts/cablecamThu, 22 Sep 2022 18:31:41 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:51ccfa4d-3c71-4ea1-8f60-e62bb3b25626genebren1<p>Looking good so far.&nbsp; Keep up the good work!</p><img src="https://community.element14.com/aggbug?PostID=24452&AppID=386&AppType=Weblog&ContentType=0" width="1" height="1">RE: Creating a cable Supported and Driven Camera with 3D Printing and a GoPro - Cablecamhttps://community.element14.com/challenges-projects/project14/theworldinmotion/b/blog/posts/cablecamThu, 22 Sep 2022 18:18:36 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:51ccfa4d-3c71-4ea1-8f60-e62bb3b25626DAB1<p>Nice rig.</p> <p>What are you going to use it for?</p><img src="https://community.element14.com/aggbug?PostID=24452&AppID=386&AppType=Weblog&ContentType=0" width="1" height="1">