Design for Manufacture, How DRC makes sure your board is manufacturable

re: Design for Manufacture, How DRC makes sure your board is manufacturable by e14 Contributor

e14 Contributor — Tue, 16 Jun 2015 21:00:07 GMT

Jorge,

The link in the CadSoft email to register and receive the 2 complimentary PCBs from Pentalogix did not work....

-Emach

re: Design for Manufacture, How DRC makes sure your board is manufacturable by sidprice

sidprice — Tue, 16 Jun 2015 22:35:36 GMT

I found the webinar and registered before the new link ... but no complementary PCBs

Sid.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by mjones@donet.com

mjones@donet.com — Wed, 17 Jun 2015 11:54:31 GMT

It sure would be nice if when you click on the "register here" link in the email, it would actually take you to the registration page instead of the element14 home page. Then I wouldn't have to look all over the home page to try and figure out where to register.

I'll assume the freebies become available once you actually attend the webinar... I hate to assume. Maybe the conditions for any freebies could be stated up front so we wouldn't have to guess.

But enough bitching and complaining, I still appreciate the webinars!

re: Design for Manufacture, How DRC makes sure your board is manufacturable by bms-gei

bms-gei — Wed, 17 Jun 2015 13:54:51 GMT

I'm with them, register link did not work and thus no free PCB's.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by Jorge_Garcia

Jorge_Garcia — Wed, 17 Jun 2015 18:39:36 GMT

Hi Guys,

Sorry about the confusion. Marketing is looking into the link and I'll have some more information here before the end of the day. They told me something with the links got messed up.

hth,

Jorge Garcia

re: Design for Manufacture, How DRC makes sure your board is manufacturable by Jorge_Garcia

Jorge_Garcia — Wed, 17 Jun 2015 20:36:44 GMT

Hi Guys,

See the webinar description. We got the go ahead to place the link in the description. Let me know if anything else comes up.

Best Regards,

Jorge Garcia

re: Design for Manufacture, How DRC makes sure your board is manufacturable by e14 Contributor

e14 Contributor — Thu, 18 Jun 2015 17:39:47 GMT

This is confusing. I really had to hunt for the link once I logged in, and now it won't let me join the webinar.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by e14 Contributor

e14 Contributor — Thu, 18 Jun 2015 17:41:44 GMT

OK, I went in and made an edit to my account info to see if anything different happened and it let me in this time.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by brownwire

brownwire — Thu, 18 Jun 2015 17:41:57 GMT

How do we sign in to the webinar?

re: Design for Manufacture, How DRC makes sure your board is manufacturable by bms-gei

bms-gei — Thu, 18 Jun 2015 17:49:25 GMT

I had to go up and click change under "you are attending" and then click Yes again. Then the webex thing popped up to confirm it is sending me an email. This did not work yesterday.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by scott216

scott216 — Thu, 18 Jun 2015 17:59:08 GMT

I didn't get an email with the webex link. how do I join

re: Design for Manufacture, How DRC makes sure your board is manufacturable by jimmyorkin

jimmyorkin — Thu, 18 Jun 2015 17:59:43 GMT

No email with WebEx link. One minute away.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by sousaerran

sousaerran — Thu, 18 Jun 2015 18:00:34 GMT

I have not yet received an email from Webex yet.

re: Design for Manufacture, How DRC makes sure your board is manufacturable by jonhpeterson

jonhpeterson — Thu, 18 Jun 2015 18:00:41 GMT

signed up yesterday. reclicked the yes link, got popup... still no email invite..no way to attend.....arrrrggghhhh

re: Design for Manufacture, How DRC makes sure your board is manufacturable by e14 Contributor

e14 Contributor — Thu, 18 Jun 2015 18:01:00 GMT

I have yet to receive the link to install

re: Design for Manufacture, How DRC makes sure your board is manufacturable by SMD111

SMD111 — Thu, 18 Jun 2015 18:03:41 GMT

I've been watching the countdown on this seminar's page. I am logged in.

The timer came down to zero, and ... nothing happened at all.

I did not receive any invites either. And this is not the first time.

What a mess!

re: Design for Manufacture, How DRC makes sure your board is manufacturable by e14 Contributor

e14 Contributor — Thu, 18 Jun 2015 18:03:50 GMT

no email, and no way to join event...

re: Design for Manufacture, How DRC makes sure your board is manufacturable by e14 Contributor

e14 Contributor — Thu, 18 Jun 2015 18:04:30 GMT

Still waiting for the Webex email....

re: Design for Manufacture, How DRC makes sure your board is manufacturable by techsupport

techsupport — Thu, 18 Jun 2015 18:04:34 GMT

To join the EAGLE webinar please use the following link:

https://premierfarnell.webex.com/premierfarnell/onstage/g.php?MTID=e2647f35b36e889ee0e401658f53f3297

Password: Element14

re: Design for Manufacture, How DRC makes sure your board is manufacturable by daniel519

daniel519 — Thu, 18 Jun 2015 18:04:37 GMT

would really like to join, but it's not clear just how.

pls let us know how to login to the webex