Related Components & Dev Boards for element14 Essentials: Programmable Devices I

pchan — Fri, 18 Feb 2022 20:44:29 GMT

Current Revision posted to Documents by pchan on 2/18/2022 8:44:29 PM

Programmable Devices I: Programmable Logic

Sponsored by

The element14 ESSENTIALS of Programmable Devices I covers the fundamentals of programmable logic, including Boolean Algebra, Logic Gates, Combinatorial and Sequential Circuits and an introduction to HDL. This supplementary guide discusses some related components and development boards available for projects and prototyping.

Go to Learning Module

Related Components

Artix-7 FPGA

Buy NowBuy Now

The Xilinx Artix^®-7 FPGA provides very high performance-per-watt fabric, transceiver line rates, DSP processing and AMS integration in a cost optimized FPGA. Featuring MicroBlaze^™ soft processor and 1,066Mb/s DDR3 support, it is optimized for low power applications requiring serial transceivers, high DSP and logic throughput. It features up to 215K logic cells, 13Mb BRAM, 740 DSP slices, 929 GMAC/s, 16 transceivers, 6.6Gb/s transceiver speed, 211Gb/s serial bandwidth, x4 Gen2 PCIe interface and 500 I/O pins.

Kintex-7 FPGA

Buy NowBuy Now

The Xilinx Kintex^®-7 FPGA features up to 478K logic cells, 34Mb block RAM, 1920 DSP slices, 2845 GMAC/s DSP performance, 32 transceivers, 12.5Gb/s transceiver speed, 800Gb/s serial bandwidth, x8 Gen2 PCIe interface, 500 I/O pins, VCXO component, advanced extensible interface 4 (AXI4) IP, agile mixed signal (AMS) integration and 1.2 to 3.3V I/O voltage. The Kintex^®-7 is ideal for applications including 3G and 4G wireless, flat panel displays and video over IP solutions.

Spartan-7 FPGA

Buy NowBuy Now

Spartan^®-7 FPGAs feature a MicroBlaze^™ soft processor running over 200 DMIPs with 800Mb/s DDR3 support built on 28nm technology. It offers an integrated ADC, dedicated security features, and Q-grade (-40 to +125°C) on all commercial devices. These devices are ideally suited for industrial, consumer, and automotive applications including any-to-any connectivity, sensor fusion, and embedded vision.

Development Boards

SPARTAN-7 FPGA Development Board

Buy NowBuy Now

The Arty S7 is a Xilinx Spartan-7 FPGA maker and hobbyist development board. Arty S7 was designed to be MicroBlaze ready and comes out of the box ready to use with the free Xilinx WebPack version of Vivado Design Suite.

Xilinx Spartan-7 50 FPGA (xc7s50csga324-1) featuring 8,150 slices (each slice contains four 6-input LUTs and 8 flip-flops), 2,700 Kbits of fast block RAM, Five clock management tiles, each with a phase-locked loop (PLL), 120 DSP slices and Internal clock speeds exceeding 450MHz.

Memory: 256MB DDR3L with a 16-bit bus @ 650MHz and 16MB Quad-SPI Flash

4 Pmod ports

Arduino/chipKIT Shield connector

ARTIX-7 FPGA Development Board

Buy NowBuy Now

The Arty is a ready-to-use development platform designed around the Artix-7 Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. Arty is compatible with the Vivado^® Design Suite. It is supported under the free WebPACK^™ license.

Xilinx Artix-35T FPGA (xc7a35ticsg324-1L) featuring 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops); 1,800 Kbits of fast block RAM; Five clock management tiles, each with a phase locked loop (PLL); 90 DSP slices; Internal clock speeds exceeding 450MHz;

Memory: 256MB DDR3L with a 16-bit bus @ 667MHz; 16MB Quad-SPI Flash

4 Pmod connectors

Arduino/chipKIT Shield connector

410-328-35T410-328-35TARTIX-7 FPGA Development Board

Buy NowBuy Now

The Digilent 410-328-35T410-328-35T is a small 48-pin DIP form factor development board that's based on the Xilinx Artix-7 FPGA At just 0.7 by 2.75 it can also be loaded in a standard socket and used in embedded systems It is fully compatible with the Vivado ^® Design Suite and supported under the free WebPACK^™ license. This free license includes the ability to create MicroBlaze soft-core processor designs.

512KB SRAM with an 8-bit bus and 8ns access times

4MB Quad-SPI Flash

USB-JTAG Programming Circuitry

Powered from USB or external 3.3-5.5V supply connected to DIP pins

USB-UART bridge

48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)

One Pmod connector with 8 Digital I/O

*Trademark. Xilinx is a trademark of Xilinx Inc. Other logos, product and/or company names may be trademarks of their respective owners.

Tags: programmable_device, related components & dev boards for element14 essential, programmable_logic