/learn/learning-center/stem-academy/microbit/b/blog/posts/microbit-brained-robotsI made a few Microbit Robots for the local library coding class.This one was printed from scratch. we started with just rf remote control but I plan to add line following sensors. These two used commercially available chassis. They all use a homemadeen-USTelligent Community 12https://community.element14.com/learn/learning-center/stem-academy/microbit/b/blog/posts/microbit-brained-robotsSat, 13 Oct 2018 16:02:28 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:738e3c46-e601-471b-9641-b2a8595e29cdneilk1<p>Hi <span>[mention:f0e8a00c5e0f4a21a82a1835132620b4:e9ed411860ed4f2ba0265705b8793d05]</span> - they look very impressive <span>[View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-738e3c46-e601-471b-9641-b2a8595e29cd/contentimage_5F00_1.png:16:16]</span>.</p><p>&nbsp;</p><p>Did you code the micro:bits using makecode or did you need to drop down to a lower level</p><p>&nbsp;</p><p>Neil</p><img src="https://community.element14.com/aggbug?PostID=5585&AppID=140&AppType=Weblog&ContentType=0" width="1" height="1">