/learn/learning-center/stem-academy/microbit/microbit-tutorial-videos/b/blog/posts/neopixels-building-a-project-from-scratchWelcome back! Natasha here. :) This is the eighth of 10 blog posts featuring each video in my series on animating LEDs with micro:bit and Make Code. If you&#39;ve just stumbled upon this post, start from the beginnin...en-USTelligent Community 12https://community.element14.com/learn/learning-center/stem-academy/microbit/microbit-tutorial-videos/b/blog/posts/neopixels-building-a-project-from-scratchSun, 12 May 2024 19:26:55 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6840b55c-e2e1-4d15-b2de-418c53805413DAB1<p>Nice overview of the current LED offerings.</p> <p>When LEDs first came out we had just low power red ones.</p><img src="https://community.element14.com/aggbug?PostID=27955&AppID=243&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/learn/learning-center/stem-academy/microbit/microbit-tutorial-videos/b/blog/posts/neopixels-building-a-project-from-scratchSat, 11 May 2024 14:22:45 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6840b55c-e2e1-4d15-b2de-418c53805413beacon_dave0<p>Nice selection covered there.</p> <p>Discrete through-hole NeoPixels may be worth a mention, especially for those wanting to make a custom PCB or stripboard layout but not wanting to attempt SMD. Also potential for dipping into cast resin moulds for creating custom shapes.</p> <p>I&#39;m quite interested in seeing what people have managed to come up with mounting arrangements. Has there ben any interesting 3D printing of clips, support brackets, channels, etc. going on to give a seamless appearance once installed on the bicycle ?</p><img src="https://community.element14.com/aggbug?PostID=27955&AppID=243&AppType=Weblog&ContentType=0" width="1" height="1">