How Do You Get a Nano into an Eagle Schematic?/members-area/personalblogs/b/blog/posts/how-do-you-get-a-nano-into-an-eagle-schematicAs it is Christmas and we are in a lockdown, or as good as, so cannot see any family, I thought I might use this opportunity to actually get to grips with Eagle and maybe make a PCB for my robots so that I can continue my quest to take over the worlden-USTelligent Community 12RE: How Do You Get a Nano into an Eagle Schematic?https://community.element14.com/members-area/personalblogs/b/blog/posts/how-do-you-get-a-nano-into-an-eagle-schematicWed, 23 Dec 2020 16:26:53 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:3e8deff7-3582-4010-ab3e-7667449c55edgenebren1<p>Dubbie,</p><p>&nbsp;</p><p>The correct way to do this is to use a library element.&nbsp; You might be able to find a library for the Arduino Nano online, so look around.</p><p>&nbsp;</p><p>When I was dropping a Nano into my Ardunio Day project, I took a simple shortcut.&nbsp; I dropped to 15-pin pin headers onto my schematic, attached nets to the pins and labeled them with the Nano pinouts.&nbsp; I could then attach the nets to the necessary locations in my design.&nbsp; When it came to doing the layout, just position the two headers appropriately (aligned with the proper spacing).</p><p>&nbsp;</p><p>Good luck!</p><p>Gene</p><img src="https://community.element14.com/aggbug?PostID=10553&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">