/members-area/personalblogs/b/blog/posts/xmutil-a-new-platform-and-app-management-utility-from-xilinxIn this blog series, I dive into Xilinx&#39;s new platform management utility called xmutil.IntroductionFor those who did not see my write-up on the new Xilinx Kria KV260 Vision AI Starter Kit, I invite you to check it out on hackster.io: http://avnet...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/xmutil-a-new-platform-and-app-management-utility-from-xilinxThu, 05 Aug 2021 23:59:58 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7f9e44b9-7ca8-4da3-b626-d5ac128f49e6robbyshorts1<p>Hi Mario, thank you for this very informational and helpful blog about the xmutil tool. I&#39;m also currently using the Kria kv260 board but I&#39;m having a weird issue with trying to use the <strong>xmutil listapps</strong> command. Upon trying to do this command, nothing seems to happen, and the console feed simply goes to a new line as if I had just pressed &quot;enter&quot;. This is very frustrating as it it preventing me from using the smartcam app, as I am unable to see what apps are currently installed.</p><p>As a side note, skipping this step and just doing <strong>xmutil loadapp kv260<span>-</span>smartcam</strong> produces the same result, in which nothing happens. I am currently the root user &quot;root@xilinx-k26-starterkit-2020_2:~# &quot; and I am certain that the smartcam app is installed, as doing <strong>dnf install packagegroup-kv260-smartcam.noarch</strong> tells me that this application is already installed. Please help!</p><img src="https://community.element14.com/aggbug?PostID=11220&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">