/members-area/personalblogs/b/blog/posts/quadrocopter---testing-and-assemblyFor the next stage of quadrocopter development I wanted to get something off the ground to ensure that when I get the software correct I will be able to put it to use. To do this I brought out my trusty 3D printer and SketchUp software and got designen-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/quadrocopter---testing-and-assemblyMon, 30 Sep 2013 22:34:50 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:9bb0884a-bba9-4239-a913-55ab375b6c82e14 Contributor0<p>I am not an expert but I would consider printing in 618 nylon from <a class="jive-link-external-small" href="http://www.taulman3d.com/618-features.html" rel="nofollow ugc noopener" target="_blank">http://www.taulman3d.com/618-features.html</a></p><p><a class="jive-link-external-small" href="http://reprap.org/wiki/Taulman3D_618_Nylon" rel="nofollow ugc noopener" target="_blank">http://reprap.org/wiki/Taulman3D_618_Nylon</a></p><img src="https://community.element14.com/aggbug?PostID=16559&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">