/members-area/personalblogs/b/blog/posts/getting-started-with-gertduino---are-you-serialYes indeed, I&#39;m super serial right now. Or is that supposed to be &#39;super cereal&#39;?I carefully followed the instructions for disabling login via the Pi&#39;s serial port. Then I disabled the Pi&#39;s boot messages (out to the serial port), shut down the systemen-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/getting-started-with-gertduino---are-you-serialFri, 09 May 2014 17:26:56 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:90f20596-a8c8-4556-99bb-84799cfe437bwegunterjr1<p>I also have followed these steps:</p><p><span>arefully followed the instructions for disabling login via the Pi&#39;s serial port. Then I disabled the Pi&#39;s boot messages (out to the serial port), shut down the system, set the jumpers to connect the Pi&#39;s serial transmit line to the Gertduino&#39;s serial receive line (and vice-versa), powered up the system (it booted up just fine, yay!), installed the minicom terminal emulator,</span></p><p><span><br /></span></p><p><span>I just can&#39;t remember if i did it manually, or if i used Gordon&#39;s script. Either way, it is complete.&nbsp; I use minico to connect to the arduino (pi - 328 using the crossed wires) but all i get is gibberish in the window. Anything I Might be missing?<br /></span></p><img src="https://community.element14.com/aggbug?PostID=17541&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">