/members-area/personalblogs/b/blog/posts/creating-the-6-dof-platform-part3In this final blog article we will be discussing the finer details of finishing the 6DoF Platform, alongside a conversion to a PIC based microcontroller. Completing the Platform;With all the parts created for the actual 6DoF platform we needed t...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/creating-the-6-dof-platform-part3Sun, 21 Jun 2015 19:50:14 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:9f857d7e-db35-45f2-b93d-5846df1ab3e9Former Member1<p>Really neat design. I&#39;m looking to make something similar but hoping to re-use some existing kit. Are you using Towerpro servos? If so, which ones and what size ball connectors / rods have you used with them? My Towerpros are the micro SG90s and I was wondering if they would be suitable - most examples of Stewart platforms seem to use larger hobby servos. Thanks.</p><img src="https://community.element14.com/aggbug?PostID=20163&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/blog/posts/creating-the-6-dof-platform-part3Mon, 16 Mar 2015 18:59:39 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:9f857d7e-db35-45f2-b93d-5846df1ab3e9DAB1<p>Very nice.</p><p>&nbsp;</p><p>You might want to add some smoothing or dampening to the drivers.&nbsp; That will reduce the amount of jerking motions.</p><p>&nbsp;</p><p>All in all, a good initial implementation.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=20163&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">