/members-area/personalblogs/b/blog/posts/safe-sound-wearables---trackable-safety-helmet-for-miners-7-data-from-sensor-to-pcIn the last post , I have mentioned the sensor board I built on Arduino. I was testing the system using the serial port and before adding many sensors, I wanted to make the board work independently. Therefore I connect MSP432 and Arduino using the seren-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/safe-sound-wearables---trackable-safety-helmet-for-miners-7-data-from-sensor-to-pcWed, 03 May 2017 19:17:44 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bf533153-0c80-465e-aa1a-4f20a60893bebalearicdynamics1<p>Good. I thing it is not too difficult to bednthe studf inside an helmet. </p><p>&nbsp;</p><p>Enrico</p><img src="https://community.element14.com/aggbug?PostID=2942&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/blog/posts/safe-sound-wearables---trackable-safety-helmet-for-miners-7-data-from-sensor-to-pcWed, 03 May 2017 19:09:01 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bf533153-0c80-465e-aa1a-4f20a60893beDAB1<p>Nice update.</p><p>&nbsp;</p><p>It looks like you are making good progress.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=2942&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">