/members-area/personalblogs/b/blog/posts/screen-success-hack-like-heck-build-updateAs I previously wrote, I was not happy with the performance of a SPI-based LCD screen . The framerate was much lower than I expected. I happened to have some 4.3&quot; TFT panels with 40 pin connectors. The problem is that I don&#39;t have their original...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/screen-success-hack-like-heck-build-updateSat, 24 Mar 2018 21:35:46 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:8e88a959-fecd-4d2e-a59b-914206b0ccb4davedarko1<p>Hey,</p><p>&nbsp;</p><p>I&#39;m trying to figure out what I did wrong over here <a class="jive-link-blog-small" href="/challengesprojects/element14-presents/benheck/hack-like-heck/b/blog/posts/fame-boy---build-log-6---hack-like-heck">FAME BOY - build log 6 - Hack Like Heck</a> and am wondering about that ON/OFF pin on the LCD friend - it doesn&#39;t seem to be needed but I thought I just ask if that needs to be pulled high or something. When I measure the state it shows 0V but I have no idea what an actual working setup looks like. Thank you for sharing all of the infos!</p><p>&nbsp;</p><p>cheers,</p><p>Dave</p><img src="https://community.element14.com/aggbug?PostID=4424&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/blog/posts/screen-success-hack-like-heck-build-updateTue, 13 Mar 2018 17:40:42 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:8e88a959-fecd-4d2e-a59b-914206b0ccb4andywest1<p>Very informative... thanks for sharing! Thinking about what might be missing from the front panel. I guess it depends on whether those are speaker grilles or thumb sticks; it&#39;s a little hard to tell from the top. Also, there aren&#39;t many buttons. What about start / select functionality, etc.?</p><img src="https://community.element14.com/aggbug?PostID=4424&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">