/members-area/personalblogs/b/blog/posts/case-milling-cam-and-what-is-cam-anyway-hack-like-heck-build-logThis week felt like the week of experiments. I have never milled Sintra (PVC) before and I have never used Fusion 360 to generate the mill&#39;s CAM files. My enclosure is using layers of PVC for a couple of reasons. First, my 3D printer&#39;s build ...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/case-milling-cam-and-what-is-cam-anyway-hack-like-heck-build-logTue, 20 Mar 2018 18:41:25 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:fc10befe-0924-42da-9f51-79f8e906e4e9DAB1<p>Nice post.</p><p>&nbsp;</p><p>How is the x carve holding up with regular use?</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=4459&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/members-area/personalblogs/b/blog/posts/case-milling-cam-and-what-is-cam-anyway-hack-like-heck-build-logTue, 20 Mar 2018 12:43:10 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:fc10befe-0924-42da-9f51-79f8e906e4e9genebren1<p>Nice write-up on your case build.&nbsp; The pieces are looking good.&nbsp; Good luck on complete build.</p><p>Gene</p><img src="https://community.element14.com/aggbug?PostID=4459&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">