/members-area/personalblogs/b/blog/posts/send-a-command-to-the-mkr-wifi-1010-using-wia-and-mqttIn this tutorial, we are going to show you how to control your Arduino MKR1010 with MQTT and Wia.ComponentsMKR1010USB to Micro USB CableA Wia Account. You can create one here Arduino IDE. You can install the latest version here Setup your environmentCoen-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/send-a-command-to-the-mkr-wifi-1010-using-wia-and-mqttSat, 01 Dec 2018 04:54:52 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:347f8a5a-c2cd-451d-bbc6-a70c9b7647e4jomoenginer0<p>Austin,</p><p>&nbsp;</p><p>Nice post.&nbsp; I had seen this on the wia site but am looking to use a local MQTT broker. </p><p>&nbsp;</p><p>One thing, I hope the SSID and password you have in your pic is not your actual credentials.</p><p>&nbsp;</p><p>I&#39;m curious, did you use the default Firmware on the MKR WiFi 1010 or did you update it?&nbsp; Also, have you run into an issue with the 1010 connecting to your WiFi network? I seem to be having an issue with the board connect to my WiFi.</p><p>&nbsp;</p><p>Thanks</p><img src="https://community.element14.com/aggbug?PostID=5361&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">