/members-area/personalblogs/b/blog/posts/dcmotorsmobilerobot-5-the-pcbs-are-inside-the-chassis-but-not-all-the-wires-areFor my DC Motors Mobile Robot I am using an Arduino Nano (with no connectors soldered in) and a dual DC motor driver (DRV8833) which now fit nicely inside the 3D printed chassis. I now need to make all the connections between these two PCBs and the fen-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/dcmotorsmobilerobot-5-the-pcbs-are-inside-the-chassis-but-not-all-the-wires-areFri, 05 Jul 2019 14:43:50 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:517f975f-9d50-412c-a536-994cb775398bgenebren1<p>Dubbie,</p><p>&nbsp;</p><p>Yes, wires can be such a problem.&nbsp; The shorter you make them, the more difficult they are to work with.&nbsp; In the past, I have built PCBs to use instead of random wires, just to make an assembly cleaner.&nbsp; This might be a partial solution to your problem (albeit, a slightly expensive solution).</p><p>&nbsp;</p><p>Best of luck!</p><p>Gene</p><img src="https://community.element14.com/aggbug?PostID=7401&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">