Tiny Issue with KEMET's Pyro Sensor module

RE: Tiny Issue with KEMET's Pyro Sensor module

will2055 — Wed, 13 Nov 2019 20:50:15 GMT

Sparkfun Electronics has a breakout board for these modules that is part of their Qwiic ecosystem, so cables are more easily available: https://www.sparkfun.com/products/15804

RE: Tiny Issue with KEMET's Pyro Sensor module

clem57 — Thu, 17 Oct 2019 14:37:24 GMT

[mention:f8e962480cf8475db6094d2abb38a9c8:e9ed411860ed4f2ba0265705b8793d05] sounds like they are backtracking and leaving you in the cold. [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-545911c5-8dbe-49d7-8986-3e1f9273b8a4/contentimage_5F00_2.png:16:16]

RE: Tiny Issue with KEMET's Pyro Sensor module

dubbie — Sun, 13 Oct 2019 08:17:53 GMT

I look forward to seeing some measurements from this sensor. I have used the GridEye sensor and it will be useful to compare with this.

Dubbie

RE: Tiny Issue with KEMET's Pyro Sensor module

clem57 — Sat, 12 Oct 2019 19:11:24 GMT

Hey [mention:f8e962480cf8475db6094d2abb38a9c8:e9ed411860ed4f2ba0265705b8793d05]

The module is shipped with a cable to be connected to a JST connector on a Component mounted side of the module (JST p/n is SM05B-SRSS-TB(LF)(SN)).

Did you not get the cable?

Look at https://www.digikey.com/en/maker/projects/things-to-consider-when-designing-with-the-kemet-ss-430-sensor-module/b4abe77a5ec247adaa147a165ddfcb3f