/members-area/personalblogs/b/blog/posts/pynq-z2-workshop---session-1-blog-2Continuing on from the previous PYNQ-Z2 Workshop - Session 1 blog, this blog continues to investigate the topics covered in the Element 14 workshop session PYNQ-Z2 Workshop: Getting Started with PYNQ led by Adam Taylor, where we took an introdu...en-USTelligent Community 12https://community.element14.com/members-area/personalblogs/b/blog/posts/pynq-z2-workshop---session-1-blog-2Thu, 28 May 2020 17:57:27 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:27d08f71-e07c-4522-97bc-4a5daf641431beacon_dave1<p><span>[mention:2bb571032d0b4fae9a32a009b64212bc:e9ed411860ed4f2ba0265705b8793d05]</span> is there any information available on how to use the LogicTools Pattern Generator with either the PMOD or Raspberry Pi interfaces on the PYNQ-Z2 board ?</p><p>&nbsp;</p><p><a class="jive-link-external-small" href="https://pynq.readthedocs.io/en/v2.5.1/pynq_overlays/pynqz2/pynqz2_logictools_overlay.html" rel="nofollow ugc noopener" target="_blank">ReadTheDocs</a> keeps hinting that it can be done, but also appears to contradict itself in places (probably due to the interface differences between the Z1 &amp; Z2), and that it is even automatic via the Interface Switch assuming that you supply the correct pin names but they don&#39;t appear to be documented ?</p><p>&nbsp;</p><p>Even if it can&#39;t directly connect to the PMOD IOP then presumably the LCP for the Raspberry Pi should be able to access&nbsp; the PMODA interface which is shared with 8 pins of the RPi header ? However I can&#39;t find any examples of how to use the RPi interface with the Pattern Generator either. </p><img src="https://community.element14.com/aggbug?PostID=9415&AppID=293&AppType=Weblog&ContentType=0" width="1" height="1">